Product InfoManufacturer InfoReturn Information

Features

  • JBA Headers replace restrictive stock manifolds with precision built exhaust headers that maximize exhaust flow for major increases in horsepower, torque and throttle response
  • Increase your engine's exhaust output, which results in an overall improvement in power, efficiency and fuel economy
  • Dyno testing shows typical performance gains on modern, fuel injected V8s to be 10-25hp with similar increases in torque
  • Add another 7-10hp with the JBA Performance Exhaust
  • All JBA Headers are 50 state smog legal and carry a CARB E.O. number (California Air Resources Board Executive Order) that guarantees your modification
  • JBA Headers are crafted from quality stainless steel
  • Mandrel-bent tubing ensures a consistent diameter throughout the pipes for unrestricted flow and greater performance than stock cast iron or press-bent manifolds
  • Over-sized exhaust ports provide enhanced exhaust flow, even with bored and ported engines
  • Your new JBA Headers use a 3/8" thick, one piece, laser cut head and flanges for a leak-free seal that installs effortlessly
  • Most JBA Headers for V8 engines come with the patented Firecone collector that vastly improves the scavenging of exhaust gasses for better power, torque and throttle response
  • Includes premium mounting hardware for bolt-on installation
  • All JBA Headers are made with pride in the USA
  • JBA Headers come in 4 different finishes
  • Backed by a Lifetime Warranty

Description

Ditch your tired, restrictive, inefficient stock exhaust manifold, and let your engine breathe freely with performance headers. Unlock your motor's power potential with JBA Cat4ward Headers.

The Achilles heel for engine performance is its exhaust. With JBA Headers, you'll get an extra 10-25 tire-turning horses out of your motor. The steel tubing is mandrel-bent with extra-large exhaust ports and a leak-free, laser-cut 3/8" thick flange for fast exhaust flow.

You also get JBA's patented Firecone merge collector, which quickly moves spent gasses out to your tailpipe. This exhaust header lets your engine breath easier, giving you more power, torque and throttle response.

Don't fear the smog station. Your Dyno proven JBA Headers are street-legal across the USA.

All mounting hardware is included for a do-it-yourself install that doesn't void your factory warranty. 4 finishes to choose from. Of course, your JBA Headers come with a Lifetime Warranty.

Notes

  • Some vehicles will require an additional down-pipe (either a Y- or H-pipe) for the installation.

JBA Cat4ward Headers Customer Reviews

Average Customer Rating

   (102)
Appearance Appearance
Ease of Installation Ease of Installation
Price/Value Price/Value
Quality Quality
JBA SILVER CERAMIC COATED HEADERS

Posted on 04/30/2009 by Guillermo A. - 2002 Dodge Ram (Las Vegas,NV)

8 of 9 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"WELL I GOT MY JBA HEADERS IN THE SILVER CERAMIC COATED FINISH. THEY WERE A LITTLE PRICEY BUT OTHER THAN THAT THEY ARE GREAT. I GOT THEM INSTALLED ABOUT A WEEK AFTER I RECEIVED THEM. I NOTICED A HUGE DIFFERENCE IN HOW QUICK MY TRUCK CAN PICK UP THE MILES. I STILL DONT KNOW HOW MUCH HORSEPOWER I GAINED BUT I WILL SOON FIND OUT WHEN MY TRUCK GETS DYNOED. OVERALL I LOVE MY NEW HEADERS. THANKS AUTOANYTHING!!!"

Was this review helpful? Yes No

About Guillermo A.
Vehicle
2002 Dodge Ram
I use my vehicle for
EVERYDAY DRIVING
 
Good stuff

Posted on 09/24/2009 by Kelley W. - 2000 Dodge Ram (Morenci,AZ)

4 of 5 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"Good headers so far. Fairly easy to install. Truck sounds insane with these 3inch dual exhaust and cherry bomb extremes. Overall good buy anyone can install"

Was this review helpful? Yes No

About Kelley W.
Vehicle
2000 Dodge Ram
I use my vehicle for
4x4
 
Good stuff

Posted on 09/17/2009 by James M. - 2001 Dodge Ram (Columbia Falls,MT)

4 of 4 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"These JBA headers are a good step up from stock. look good, sound good, and run good. I recommend them for anybody wanting decent headers with out paying an arm and a leg."

Was this review helpful? Yes No

About James M.
Vehicle
2001 Dodge Ram
I use my vehicle for
Daily driver and recreation
 
jba shorties

Posted on 05/08/2009 by Ken B. - 2007 Dodge Ram (North Richland Hills,TX)

4 of 8 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"install not to bad gas milege a little better over all good product."

Was this review helpful? Yes No

About Ken B.
Vehicle
2007 Dodge Ram
 
96 Dodge Ram 5.2 JBa Cerm. Coated

Posted on 08/04/2008 by L Gordon J. - 1996 Dodge Ram (Omaha,NE)

11 of 13 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"Very good set of headers, good instructions, good hardware, and good gaskets! Installed with a flowmaster super 44 and there is a good nice deep loud muscletruck sound, better performance, and gas mileage!"

Was this review helpful? Yes No

About L Gordon J.
Vehicle
1996 Dodge Ram
I use my vehicle for
Show, Racing
 
06 daytona charger

Posted on 12/18/2006 by Carlos E. - 2005 Dodge Ram (Pleasanton,CA)

2 of 3 people found the following review helpful.

"headers made a nice differance, no complaints here"

Was this review helpful? Yes No

About Carlos E.
Vehicle
2005 Dodge Ram
I use my vehicle for
commuting
 
JBA Headers - 2008 Nissan Frontier V6 4x4

Posted on 10/30/2009 by Marcos E. - 2008 Nissan Frontier (Severn,MD)

Appearance
Ease of Installation
Price/Value
Quality

"Installed along with the JBA exhaust. They do take time to install, at least a good days worth. Most of the time is consumed taking the old ones off. Did NOT have to remove engine mount bolts. They look good and my exhaust system sounds great. Would recommend to other owners if you did the work yourself.. I can't imagine how much a regular mechanic would charge for all that labor!"

Was this review helpful? Yes No

About Marcos E.
Vehicle
2008 Nissan Frontier
I use my vehicle for
Short 7 min drive to work & towing
 
4L sohc ranger

Posted on 10/29/2009 by David H. - 2001 Ford Ranger (Round Lake Beach,IL)

Appearance
Ease of Installation
Price/Value
Quality

"Good looking headers. Noticable power increase with my Gibson cat back system. Had them professionaly installed and I'm glad. New bracket for the dip stick had to be fab'd and some creativity was needed for the EGR connection as well."

Was this review helpful? Yes No

About David H.
Vehicle
2001 Ford Ranger
I use my vehicle for
towing a travel trailer and hunting
 
Awesome

Posted on 10/27/2009 by William B. (Newton,NJ)

Appearance
Ease of Installation
Price/Value
Quality

"THEY SOUND GREAT AND LOOK GOOD"

Was this review helpful? Yes No

About William B.
 
installation & sound

Posted on 10/16/2009 by Joseph S. - 1991 Honda Accord (Williamsport,PA)

1 of 1 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"ease of installation was very easy but thank god i had the bolts to attach them to my heads because the bolts that came with it did not fit,but everything worked out alright.and the sound that these things put is really fine, i just love the way they rumble. thank you"

Was this review helpful? Yes No

About Joseph S.
Vehicle
1991 Honda Accord