S&B Cold Air Intake Kit

Please select your vehicle below for custom pricing

View larger image
S&B Cold Air Intake Kits are
custom-designed for
your vehicle
Additional Views
List Price:
AutoAnything:
Shipping: Free Shipping
Availability:
Financing:
Customer Rating: Customer Rating
Loading... Select your vehicle
Product InfoManufacturer InfoReturn Information

Features

  • The S&B Cold Air Intake instantly adds free-breathing, free-wheeling horsepower gains that put lagging stock intakes to shame
  • Custom-made for your specific year, make and model vehicle
  • All S&B Cold Air Intakes feature a premium, 4-layer cotton-gauze S&B Air Filter (8-layers for diesel) specifically matched to your vehicle type
  • The included filter with your S&B Cold Air Intake is fully washable and reusable for life
  • Exclusive to the S&B Cold Air Intake is a custom air box that keeps loose dirt and turbulent engine air out of your system
  • All S&B air boxes feature an exclusive clear window top to ease inspection of your high-performance filter-and it's great for showing off
  • S&B Cold Air Intakes feature a specially-crafted crosslink intake tube that minimizes restrictions in the line
  • With the included mounting hardware, an S&B Cold Air Intake replaces your stock tract in 30 minutes or less
  • Kit includes easy to use installation instructions and illustrations
  • S&B Cold Air Intakes also help balance air/fuel ratios that improve your gas mileage
  • Each S&B Cold Air Intake is CARB-approved and 50-state legal or pending approval (see note below)
  • S&B Cold Air Intakes are made right here in the USA
  • Your S&B Cold Air Intake is backed by an outstanding 1,000,000-mile warranty

Description

Put S&B’s 30 years of filtration, cool air and power experience to work under your hood! S&B Cold Air Intakes bring your engine to life through the strength of superior design. Factory parts can’t come close to the unreal airflow provided by an S&B Cold Air Intake—the secret to unlocking extra horsepower.

Among the many premium design features of an S&B Cold Air Intake is their custom air box. S&B’s exclusive design keeps warm engine air out, shelters your filter and has a clear top—the industries first—to ease filter inspection.

Your S&B Cold Air Intake is complete with a premium S&B Air Filter for maximum airflow and engine protection. S&B filters are constructed of top-shelf cotton gauze in either 4 or 8 calibrated layers, providing optimal flow and filtration to your motor.

Grab your tools with complete confidence—S&B Cold Air Intakes fit as well as they perform. And, your S&B Cold Air Intake boasts a 1,000,000-mile warranty.

Notes

  • Emissions-related parts for new model year vehicles may be in "pending" status for C.A.R.B. certification. Earning certification takes time, but will be complete before your new vehicle's first smog check.

Average Customer Rating

  (118)
Appearance Appearance
Ease of Installation Ease of Installation
Price/Value Price/Value
Quality Quality
Sort By
2005 F-150 4.6

Posted on 11/01/2006 by Michael S. - 2005 Ford F150 (Alpharetta,GA)

1 of 1 people found the following review helpful.

"Great intake kit , makes a nice deep sound , fits perfectly. The instructions could be better but if you ever worked on cars it's not a problem. gives you about 1 mpg better. The price is right too"

Was this review helpful? Yes No

About Michael S.
Vehicle
2005 Ford F150
I use my vehicle for
everything
 
04' Dodge Diesel

Posted on 09/16/2006 by Pamela M. (Abita Springs,LA)

1 of 1 people found the following review helpful.

"The fit was perfect and easy to install. i would recommend this kit."

Was this review helpful? Yes No

About Pamela M.
 
clean air

Posted on 09/06/2006 by William E. (Springfield,IL)

"easy installed, made good, more than i expected, good price. i shopped the net before buying anything."

Was this review helpful? Yes No

About William E.
 
S & B COLD AIR INTAKE

Posted on 09/05/2006 by James R. (Green Valley,AZ)

"SEEMS TO HAVE IMPROVED PERFORMANCE AND WA EASY TO INSTALL GOOD DIRECTIONS"

Was this review helpful? Yes No

About James R.
 
not a fun install

Posted on 08/20/2006 by Joseph S. (Bloomsburg,PA)

"thought this would be a pretty straight-forward install, but I was wrong- the directions were very vague and poorly illustrated, much of it was a guessing game. I was short some of the fasteners, and had others that didn't go anywhere. i had to drill new holes in the inspection cover to get all four screws in, and the routing of the vent house leaves alot to be desired."

Was this review helpful? Yes No

About Joseph S.
 
S&B Cold Air Intake Kit for Mustang GT

Posted on 08/18/2006 by Lynn G. (Anchorage,AK)

"This kit was easy to install although there were a few bolts and gaskets missing. Performance wise, I've seen a moderate increase in power. The best thing is it isn't as loud with the top on as my K&N on my truck so, I can still really hear my dual exhaust! I'd recommend it."

Was this review helpful? Yes No

About Lynn G.
 
Love it

Posted on 07/30/2006 by Santos M. (Lancaster,PA)

1 of 1 people found the following review helpful.

"i went with the s&b intake because of it plastic tube ,boy was i suprise ,it's quiter then my k&n on my other car and really opens my magnaflow exhaust. also the air box keeps the filter area cold, that's kinda the point right"

Was this review helpful? Yes No

About Santos M.
 
Mickey

Posted on 07/25/2006 by Mitchell G. (Nottingham,PA)

"I was disappointed in vague instructions, filter would not fit in box without cutting a hole in side, which would make it a hot air box. I purchased a 4 inch drain 45 degree elbow & trimmed it down to keep the filter in the box. Now it performs well & looks good.This was installed on a 05 Mustang GT."

Was this review helpful? Yes No

About Mitchell G.
 
Nice system, kit needs work

Posted on 07/20/2006 by Scott E. (Chandler,AZ)

"Now that I have the intake in I couldn't be much happier with it. Sounds great and give my Tahoe nice solid power across a very wide band of RPMs. The kit was missing 6 screws, the four to mount the flange to the box that holds the air filter, and the two for mounting the box to the fender. It was also missing the 3-1/2 inch rubber tube, I had to use one of the "extra" 4 inch tubes to connect the MAF to the flange. If not for the missing parts, I would have given the system a higher rating for sure!"

Was this review helpful? Yes No

About Scott E.
 
steve c

Posted on 06/01/2006 by Steve C. - 2003 Dodge Ram (Pasadena,MD)

"The cold air kit is great,definate power upgrade,the jury is still out on the mpg increase though."

Was this review helpful? Yes No

About Steve C.
Vehicle
2003 Dodge Ram
I use my vehicle for
work/daily
 
?

Posted on 05/01/2006 by Michael V. (Loomis,CA)

"Not sure how long box will hold up to vibration (mounting)"

Was this review helpful? Yes No

About Michael V.
 
Improvement over stock

Posted on 04/15/2006 by Jeffery D. (Denver,CO)

"The S&B design for my vehicle retains the OEM air box but provides a great conical filter at the tip. Better accelerator response w/o excessive intake noise. Previous to my S&B I had a kit that replaced everything OEM and it had better response but noise/vibration was unbearable. I'm keeping my S&B!"

Was this review helpful? Yes No

About Jeffery D.
 
not impressed

Posted on 03/16/2006 by Paul W. (Simi Valley,CA)

0 of 1 people found the following review helpful.

"the instructions left a lot to the imagination, very poor. The rubber connectors are very slippery and I am wondering if the clamps will slip after some time of driving. I have not noticed any increase in HP or fuel mileage, just a lot more noise on WOT. Seems like a pretty 'cheesy' system, I am not impressed. By the way, I am a field service rep for a major US car manufacturer so I am around cars/service and parts departments everyday."

Was this review helpful? Yes No

About Paul W.
 
Nice Product

Posted on 03/16/2006 by John A. G. (Statesboro,GA)

"I have had this intake for about two weeks and I there are noticable power gains. The sound is major and the look of the intake is nice. I took a shot in the dark on this intake but im happy. For an AEM fan, I believe this is a great product. No complaints here."

Was this review helpful? Yes No

About John A. G.
 
very pleased

Posted on 03/08/2006 by Steve E. (Casper,WY)

"easy install like the idea of air box with option of leaving top off but sounds good with top on ,truck seems stronger but little improvement in gas milage [probly because i like the sound of foot in it]"

Was this review helpful? Yes No

About Steve E.
 
very nice

Posted on 02/21/2006 by David W. (Dallas,GA)

"when the cold air intake came to my house it was a very simple set up and i didnt think that it was what i had asked for but it delivered everything i want like more power, better gas mileage, and better torque. it event help my trucks tendency to wind out the engine during shifting when i slam the gas down."

Was this review helpful? Yes No

About David W.
 
Dodge 24V Diesel

Posted on 02/21/2006 by Owen B. (American Falls,ID)

"Great intake kit, only took about 30min to install and looks really cool under the hood w/the clear cover over the filter. Made a noticeable difference in acceleration, I haven't had a chance to check my mileage yet but it appears to be improved. The sound of my engine is deeper and you can really hear the turbo now!"

Was this review helpful? Yes No

About Owen B.
 
S&B Cold Air Intake Kit for 2005 Mustang GT

Posted on 01/23/2006 by Anthony V. (Norfolk,VA)

"Good quality kit - materials and design. Good, clear instructions. Easy installation. Only negative was the MAF sensor mounting plate was mounted upside down on the intake tube - I was able to easily correct it. I works with out a tune, I have not noticed any Check Engine light errors. I have not yet had the chance to dyno the car with the CAI instaled."

Was this review helpful? Yes No

About Anthony V.
Showing 101 - 118 of 118 Customer Reviews
Go to page 1 2 3 4 5 Previous