Not sure which 2007 Chevy Corvette Air Intake Systems are right for you? We have over 15237 customer reviews, with an average rating of 4.5, to help you find exactly what you're looking for. Here's what some of our customers have said:
"First of all, I do recommend this unit, and I had no trouble installing it.I have a 2007 Z06 and it took me about 1.5hr to install this. I have limited experience with mechanics, but would guess that this is not much more difficult than changing the oil on most vehicles. The unit seems to function as advertised. My car actually seemed to get a little better gas mileage and run a little smoother after installation. It does not generate any significant "intake noise" like some people want to hear, but they did include a dyno sheet on a 2006 Z06 that showed a 27hp boost at 5600 rpm with this installed under their test conditions (no mention of tourque). My only complaint is that the instructions could have been slightly better organized.In that regard, I'll begin by suggesting that anyone who purchases this kit should really piece together as much of the unit on a flat surface as possible before installing it into the car. Several of the pieces are extremely hard to put together under the best circumstances and would be impossible to do under the hood. This means that you're better off assembling the whole unit outside of the car and slip it under the hood as the very last step before reconnecting the sensor.The following is for people who have just purchased the unit. First, be aware that it's not practcally possible to disconnect the mass air flow sensor connector from the stock intake while the stock intake is in place. There is a solid metal tube (part of the power steering system) that passes within a 1/2 inch of the plug and prevents you from working in this area. I found that it was easier to take the hose clamp off of the intake and flip the stock intake on its backside and attack the plug from below. There is a gray clip that mus first be removed, and then the black plug has a button on it that allows it to be disconnected from the stock intake. On the instructions, essentially swap the order of steps 3-5.Second, make sure you wait until later to put in the mass airflow sensor (ste" —Brian M from Lake Charles, LA bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2007 Chevy Corvette.