Power-up your truck or SUV with the behemoth K&N 63 Series AirCharger High-Flow Intake Kit. This cold air intake couples K&N’s biggest Filtercharger with a cool air tube for insane gains in horsepower and torque. Million Mile Limited Warranty.
Got a good grip on your wheel? Good. Because the aFe Cold Air Intake is going to take you on a wild ride. This cold air intake rams performance-inducing air down your combustion chamber’s throat to take power to the max. Lifetime Warranty.
Replace stock parts with an Airaid Intake System. This easy-to-install cold air intake system delivers instant throttle and torque, plus boosts MPG for the conservative driver. Cold air intake comes with or without intake tube. Lifetime Warranty.
Unleash your engine’s true power potential with a Volant Cold Air Intake. These cold air intakes increase airflow to take horsepower and throttle response to the max. Get yours with a performance or oil-free PowerCore® air filter. 1-year warranty.
Fill your engine’s lungs with a blast of oxygen for an immediate spike in energy. The BBK Power-Plus Cold Air Intake System is dyno proven to crank up the power for a wild ride. And, this cold air intake comes in a variety of cool finishes. 1-year warranty.
Let your custom ride breathe through a truly custom air intake with the Volant Universal FabShop Full Intake Kit. Designed to let you custom configure your own intake design, this custom intake kit includes ducting, a filter, brackets, hardware and connectors. 1-year warranty.
Your engine’s been interviewing candidates for the position of air traffic controller. The shoo-ins: Corsa Cold Air Intakes by Corsa. Utilizing Donaldson PowerCore Filtration Technology, Corsa intakes direct air through optimized channels which allow high volumes of clean air to efficiently enter the combustion chamber. 1-year intake warranty, 4-year/100,000-mile filter warranty.
Top off your DIY CAI with the Airaid U-Build-It Cold Air Dam Performance Airbox. Including an air dam, top panel, mounting hardware, filter adaptor and a high-performance air filter, this custom cold air box is the perfect addition to your custom intake. Limited Lifetime Warranty.
Not sure which 2007 Chevy Corvette Cold Air Intakes are right for you? We have over 18563 customer reviews, with an average rating of 4.5, to help you find exactly what you're looking for. Here's what some of our customers have said:
"the air system was easy to install 1hr. you could tell the change from stock it was a good choice" —James B C from Landenberg, PA bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2007 Chevy Corvette, 6.0L V8.
"Good product, quite expensive for what it is. An airfilter and plastic tube. Makes the car sound better during accelation. I cannot sense any horsepower gain, hoping to have a slight MPG improvement, but have not driven car enough since installation to verify." —David L from Gainesville, MO bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2007 Chevy Corvette.
"First of all, I do recommend this unit, and I had no trouble installing it.
I have a 2007 Z06 and it took me about 1.5hr to install this. I have limited experience with mechanics, but would guess that this is not much more difficult than changing the oil on most vehicles. The unit seems to function as advertised. My car actually seemed to get a little better gas mileage and run a little smoother after installation. It does not generate any significant "intake noise" like some people want to hear, but they did include a dyno sheet on a 2006 Z06 that showed a 27hp boost at 5600 rpm with this installed under their test conditions (no mention of tourque). My only complaint is that the instructions could have been slightly better organized.
In that regard, I'll begin by suggesting that anyone who purchases this kit should really piece together as much of the unit on a flat surface as possible before installing it into the car. Several of the pieces are extremely hard to put together under the best circumstances and would be impossible to do under the hood. This means that you're better off assembling the whole unit outside of the car and slip it under the hood as the very last step before reconnecting the sensor.
The following is for people who have just purchased the unit. First, be aware that it's not practcally possible to disconnect the mass air flow sensor connector from the stock intake while the stock intake is in place. There is a solid metal tube (part of the power steering system) that passes within a 1/2 inch of the plug and prevents you from working in this area. I found that it was easier to take the hose clamp off of the intake and flip the stock intake on its backside and attack the plug from below. There is a gray clip that mus first be removed, and then the black plug has a button on it that allows it to be disconnected from the stock intake. On the instructions, essentially swap the order of steps 3-5.
Second, make sure you wait until later to put in the mass airflow sensor (ste" —Brian M from Lake Charles, LA bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2007 Chevy Corvette.
"Installed K&N63 on my 2007 Corvette, it added a nice sound under the hood & I installed it in less than 30 mins.
The best thing I notice is my gas mileage on the highway, it went from 22.7 to 24.5 and that was not driving at 55, and was with the AC on most of the time." —Charles G. M from Hillsborough, NJ bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2007 Chevy Corvette, 6.0L V8.