Not sure which 2010 Dodge Ram Air Intake Systems are right for you? We have over 15237 customer reviews, with an average rating of 4.5, to help you find exactly what you're looking for. Here's what some of our customers have said:
"Installation took me about 1 1/2 hrs. I had a little trouble with the fit of the clamps, but other than that it went smoothly. For my application it was approx an 8.5hp gain. I Kind of wished I would have opted for the FIPK series again instead. That would have bumped it up to about a 12hp gain. Performance and mileage appear only slightly better, if at all. Having said all that, I have no regrets. It does produce a nice sound under acceleration; this is the second vehicle that I have installed a K&N intake on." —Kirk A from Blaine, MN bought a K&N 77 Series Metal Intake Kit for a 2010 Dodge Ram.
"Easy to install though instruction weren't 100% clear. I immediately noticed an increse in fuel efficiency. GREAT BUY." —Adam J from Clarksville, TN bought a Jet Power-Flow TBI Spacer for a 2010 Dodge Ram.
"Easy installation, just follow the directions. Huge filter, quality workanship. A great addition to my Flowmaster exhaust." —Justin H from , bought an Airaid Intake System for a 2010 Dodge Ram.
"Overall I am happy with my purchase of the K&N 77 Series Metal Intake Kit. I did notice the extra bit of horsepower along with a great sound. The only downfall is that it has a high pitch squealing noise when it hits a certain rpm, but other than that i love it." —Korey C from Charlotte, MI bought a K&N 77 Series Metal Intake Kit for a 2010 Dodge Ram.
"Great bang for the buck. They even priced matched. Quicker acceleration on my 2010 dodge RAM hemi. Autoanything has great customer support and can not be beat." —Hunter G from , bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2010 Dodge Ram.
"Great addition to the performance and gas mileage of my new 2010 Dodge Ram 1500. Instructions were ver easy to follow and it was installed in less than 30 minutes. No one could touch the price I received at AutoAnything!" —Samuel G from Edmond, OK bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2010 Dodge Ram.
"The first thing I noticed was the added mid and top end power.. And it brings back old times at wide open throttle as it sounds like a big four barrel carburetor.The installation instructions were great and took me about 45 minutes to install." —Kevin B from Coconut Creek, FL bought an Airaid Intake System for a 2010 Dodge Ram.
"sounds good when i get on the throttle" —Chad L from Independence, MO bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2010 Dodge Ram.
"The only issue I had with the install of the Airaid was the coupling for the hose that goes to the valve cover to pull the gases off the motor. They sent a plastic threaded 1/4 x 1/2 hose barb coupling to screw into a plastic threaded hole on the intake box. After a few attempts to screw it in, the threads on both the hole and the coupling were ruined. This is simply a poor design and a cheap coupling. I ended up taking a drill bit and opening up the threaded hole just a small amount. I then went to the hardware store and bought a brass 1/4 x 1/2 hose barb coupling and threaded it into the new hole. I will admit I was pretty dis-pleased with that part of it. You would think that for over 300 dollars they would send you a brass or metal coupling to start with.Overall however, this is a great intake system. After fighting the coupling and taking a trip to the hardware store, the sound made it worth it. I did notice a power gain, but I think with the stock muffler there may be a bottle neck. Seemed to me that it was pushing more air/exhaust than the muffler could handle. I installed a Magnaflow muffler a few days later and it was a night and day difference. More power and is getting about 1mpg better in town. (and of course sounds mean) If you do this Airaid system, I would recommend some type of high flow muffler as well. The stock muffler is just too restrictive.Good intake system, they need to send a metal coupling. I'm glad I got it, it delivers as advertised." —James A from Kansas City, MO bought an Airaid Intake System for a 2010 Dodge Ram.
"Noticed the gain in HP right away, although I did install it with a throttle body spacer on the same day. Looks great, but doesnt quite have as snug a fit on the factory box mount of my 2010 dodge ram HEMI as I would like." —Johnny B from San Diego, CA bought a Volant Cold Air Intakes for a 2010 Dodge Ram.
"I can feel and hear the power" —Nampol M from Las Vegas, NV bought an Airaid Intake System for a 2010 Dodge Ram.