Got a good grip on your wheel? Good. Because the aFe Cold Air Intake is going to take you on a wild ride. This cold air intake rams performance-inducing air down your combustion chamber’s throat to take power to the max. Lifetime Warranty.
Boost performance and save time & cash with the Volant Fast Fit 5 Intake System. Delivering all the gains without the pains, this cold air intake is budget-friendly, installs in under 20 minutes, and includes an air filter, intake tube, heat shield & hardware. 1-year warranty.
Let your custom ride breathe through a truly custom air intake with the Volant Universal FabShop Full Intake Kit. Designed to let you custom configure your own intake design, this custom intake kit includes ducting, a filter, brackets, hardware and connectors. 1-year warranty.
Top off your DIY CAI with the Airaid U-Build-It Cold Air Dam Performance Airbox. Including an air dam, top panel, mounting hardware, filter adaptor and a high-performance air filter, this custom cold air box is the perfect addition to your custom intake. Limited Lifetime Warranty.
Not sure which 2010 Dodge Ram Cold Air Intakes are right for you? We have over 18563 customer reviews, with an average rating of 4.5, to help you find exactly what you're looking for. Here's what some of our customers have said:
"Great addition to the performance and gas mileage of my new 2010 Dodge Ram 1500. Instructions were ver easy to follow and it was installed in less than 30 minutes. No one could touch the price I received at AutoAnything!" —Samuel G from Edmond, OK bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2010 Dodge Ram, 1500, 5.7L Hemi.
"Easy installation, just follow the directions. Huge filter, quality workanship. A great addition to my Flowmaster exhaust." —Justin H from Lincoln Park, MI bought an Airaid Intake System for a 2010 Dodge Ram, 5.7L Hemi.
"The first trip I took with the K&N63 was was a surprise I expected very little MPG increase but it went up from 17.8 to 20.2. The sound reminded me of my 1966 GTO with TRI powerthe sound is awesome! A little difficult to install for me.I am very impressed. Looks great" —Donald J from East Falmouth, MA bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2010 Dodge Ram, 1500, 5.7L Hemi.
"PLEASE READ, and make your life easier. If you install the filter in the case first, then try and mount it...it will make your life much easier. If you have somebody with small hands you will need top pull the filter edge over the hole. No was I could have done this with it mounted...trust me I tried.
Great product." —Adrian C from El Paso, TX bought an Airaid Intake System for a 2010 Dodge Ram, 3.7L V6.
"The first thing I noticed was the added mid and top end power.. And it brings back old times at wide open throttle as it sounds like a big four barrel carburetor.
The installation instructions were great and took me about 45 minutes to install." —Kevin B from Coconut Creek, FL bought an Airaid Intake System for a 2010 Dodge Ram, 5.7L Hemi.
"I think that the MPG claim is ridiculous but there is a noticeable difference in power. I put this on before upgrading my exhaust and it is a huge difference in sound. My neighbor asked me what I had done to my truck the day after I added the CAI. I would purchase it again, but again if you are thinking there will be a 4 MPG increase don't be fooled." —Will B from Crandall, TX bought a Volant Cold Air Intakes for a 2010 Dodge Ram.
"Have used K&N products on all of my vehicles through the years and have never been disappointed!! They always have and will stand behind their products!!! Who else can say that?" —Rene F from Harrington, DE bought a K&N 57 Series FIPK Air Intake (Fuel Injection Performance Kit) for a 2010 Dodge Ram.
"Noticed the gain in HP right away, although I did install it with a throttle body spacer on the same day. Looks great, but doesnt quite have as snug a fit on the factory box mount of my 2010 dodge ram HEMI as I would like." —Johnny B from San Diego, CA bought a Volant Cold Air Intakes for a 2010 Dodge Ram, 1500, 5.7L Hemi.
"Installation took me about 1 1/2 hrs. I had a little trouble with the fit of the clamps, but other than that it went smoothly. For my application it was approx an 8.5hp gain. I Kind of wished I would have opted for the FIPK series again instead. That would have bumped it up to about a 12hp gain. Performance and mileage appear only slightly better, if at all. Having said all that, I have no regrets. It does produce a nice sound under acceleration; this is the second vehicle that I have installed a K&N intake on." —Kirk A from Blaine, MN bought a K&N 77 Series Metal Intake Kit for a 2010 Dodge Ram.
"My butt dyno says the Juke has more power and it sounds great. Installation was a snap didn't really need the instructions." —John S P from Rio Rancho, NM bought an Injen SP Series Cold Air Intake for a 2010 Dodge Ram.
"Very easy to install, took about 30 minutes to do it. When im driving I can tell the engine is getting more air and is working less to achieve same speed as before. Very good product overall." —Omar C from Newport News, VA bought an Airaid Intake System for a 2010 Dodge Ram.