Boost power and lift MPGs—the K&N FIPK Air Intake takes performance to the next level. The 57 Series cold air intake is custom-engineered with a famous K&N Filtercharger cone filter and crosslink nylon intake tract. Million Mile Limited Warranty.
K&N 77 Series Metal Intake Kits boost power and don’t skimp on style. These cold air intakes team famous K&N performance with a smooth metal intake pipe you can’t stop drooling over. Available in Polished or Gunmetal Grey. Million Mile Limited Warranty.
Power off the line with a Spectre Cold Air Intake. This cold air intake system boosts horsepower and torque for results you can feel. Fly by the competition or save on fuel with cold air intakes from Spectre. Chrome tubing. Lifetime Warranty.
Got a good grip on your wheel? Good. Because the aFe Cold Air Intake is going to take you on a wild ride. This cold air intake rams performance-inducing air down your combustion chamber’s throat to take power to the max. Lifetime Warranty.
Replace stock parts with an Airaid Intake System. This easy-to-install cold air intake system delivers instant throttle and torque, plus boosts MPG for the conservative driver. Cold air intake comes with or without intake tube. Lifetime Warranty.
Force-feed cool, power-boosting air directly into your gas or diesel engine with an AEM Brute Force Air Intake. This custom-engineered cold air intake is tuned to ramp-up horsepower and torque. Dryflow oil-free air filter for less mess. Lifetime Warranty.
Injen pumped a decade's worth of blood, sweat and gasoline into designing the Power-Flow—the world's first tuned cold air intake system. From its hi-flow air filter to its Mega Ram tuning, this intake is built for wild performance. Lifetime warranty.
A minimalist with maximum power. That’s the aFe Momentum Cold Air Intake System. Patent-pending, housing-to-filter interface makes room for fewer intake components and a beefy 1,000 CFM air filter. Improve flow, efficiency & power with an aFe Momentum Intake. 2-year warranty.
Boost performance and save time & cash with the Volant Fast Fit 5 Intake System. Delivering all the gains without the pains, this cold air intake is budget-friendly, installs in under 20 minutes, and includes an air filter, intake tube, heat shield & hardware. 1-year warranty.
With RBP Cold Air Intakes, you don’t just boost power–you boost style. Silicone connectors and high-performance air filters make these cold air intakes perform. But, the real treat is a polished aluminum lid embossed with RBP’s wicked logo.
Your engine’s been interviewing candidates for the position of air traffic controller. The shoo-ins: Corsa Cold Air Intakes by Corsa. Utilizing Donaldson PowerCore Filtration Technology, Corsa intakes direct air through optimized channels which allow high volumes of clean air to efficiently enter the combustion chamber. 1-year intake warranty, 4-year/100,000-mile filter warranty.
Let your custom ride breathe through a truly custom air intake with the Volant Universal FabShop Full Intake Kit. Designed to let you custom configure your own intake design, this custom intake kit includes ducting, a filter, brackets, hardware and connectors. 1-year warranty.
Top off your DIY CAI with the Airaid U-Build-It Cold Air Dam Performance Airbox. Including an air dam, top panel, mounting hardware, filter adaptor and a high-performance air filter, this custom cold air box is the perfect addition to your custom intake. Limited Lifetime Warranty.
Not sure which 2010 Jeep Wrangler Cold Air Intakes are right for you? We have over 18563 customer reviews, with an average rating of 4.5, to help you find exactly what you're looking for. Here's what some of our customers have said:
"Haven't noticed a big jump in power; however my wrangler is now getting 17 mpg !!" —Dan S from Pueblo, CO bought a K&N 57 Series FIPK Air Intake (Fuel Injection Performance Kit) for a 2010 Jeep Wrangler.
"A loud machine! Improves power, volume, and looks! Good value and easy to install" —Alex K from Houston, TX bought an AEM Brute Force Air Intakes for a 2010 Jeep Wrangler, 3.8 V6.
"Overall, very happy! Installed the CAI system and Airaid throttle body spacer to try and gain some more giddy-up and more MPG. I've had the system on for almost two weeks now and can feel a difference and can most certainly hear the difference. Has a nice low rumble when punched and paired with my Borla dual exhaust. There is a slight hissing during acceleration. As for MPG, I went from an average of 15.3 to 16.8-17.1. Took about an hour and a half to install everything. - Daryl" —Daryl C from Suffolk, VA bought an Airaid Intake System for a 2010 Jeep Wrangler.
"Installation was fairly easy as it took me about 45min. I also changed plugs and oil while working on it. We went on a 5 hour trip the next day and could immediately tell the difference in power. Driving through the flint hills of kansas the jeep would normally shift down many times to climb the hills with the cruise on. With the new K & N filter it only shifted down a few times. Gas mileage is still a question because we drove into a stiff wind and didn't get a good reading. Overall I am happy with the product and would recomend it to anyone." —Robert P from Zenda, KS bought a K&N 57 Series FIPK Air Intake (Fuel Injection Performance Kit) for a 2010 Jeep Wrangler, 3.8 V6.
"I was hesitant on this purchase do to many reviews over the open air intakes for the JK. I was very pleased with the appearance, quality, and of course the easy to follow instructions. As far as performance, the Jk seems to have more torque ( not dyno'd) and gas mileage has changed for the positive of an extra 1 mile to the gallon. I would recommend this air cleaner." —Charles E from Jessup, MD bought an Airaid Intake System for a 2010 Jeep Wrangler, JK, 3.8L V6.
"I purchased the air intake for my 2010 Jeep Wrangler Unlimited. I am no motorhead and didn't have any problems installing as the directions were fairly straight forward. There appears to be an increase in horsepower. As for increased MPG, I can't really tell as I keep getting on the gas to hear the deep growl that the engine now produces." —Neal F from Waxhaw, NC bought an Airaid Intake System for a 2010 Jeep Wrangler, JK, 3.8L V6.
"The appearance & quality were great. Performance increase was noticeable through the entire RPM range. Haven't checked mileage yet. Installation was straight forward, only issue I had were the 2 bolts that attach the air filter shield. very difficult to get to the back side to secure the nuts." —Jim R from Chino Valley, AZ bought an AEM Brute Force Air Intakes for a 2010 Jeep Wrangler.
"This is my 2nd Volant cold air intake. I had one in a Tundra 5.7 also. This makes a differences in the sound of the engine durning take off! I factory air box came off in 3 mins and about 15-20 to put the new one, I also pulled the battery neg post." —Rodney W from Bear, DE bought a Volant Cold Air Intakes for a 2010 Jeep Wrangler, 3.8L V6.
"This intake gives you noticeably better performance. The only complaint I have about it is, I put this on my 2010 Jeep Wrangler and it gets water a little close than ide like to the filter." —Robin G from Mulga, AL bought an aFe Cold Air Intakes for a 2010 Jeep Wrangler.
"This certainly seemed to help the HP and the sound is a lot better. Im not sure if it helps with the MPG though as I havent seen much differance yet. I would recommend as a first step performance upgrade." —William C from Little Rock, AR bought a K&N 57 Series FIPK Air Intake (Fuel Injection Performance Kit) for a 2010 Jeep Wrangler.
"...with my new Airaid Cold Air Intake and with the service from AutoAnything ! I was initially skeptical of the claims... but gas mileage is up by 2-3mpg and the increase in mid-range horsepower is noticeable. I like the new engine growl during acceleration..." —Jeffrey H from Cumberland Center, ME bought an Airaid Intake System for a 2010 Jeep Wrangler.