Storm the competition with a K&N 69 Series Typhoon Intake System. This cold air intake comes in a cold air, short ram or convertible cold air/short ram design. Choose yours in red, silver, blue or polished. Million Mile Limited Warranty.
Rule the roads with the dyno-proven power of Injen's SP Series Cold Air Intake. This high-performance upgrade is specially engineered for speedsters seeking untamed top-end power. Mandrel bent aluminum tubing. 2 cool finishes. Lifetime Warranty.
The AEM Cold Air Intake System makes your engine scream. These cold air intakes draw in cool air for huge gains in horsepower and torque. Choose yours in one of 4 intake pipe colors. Made in the USA. Backed by a Lifetime Warranty.
Quench your craving for unrestrained horsepower and tire-turning torque with Injen's RD Series Cold Air Intake. This cold air intake system mounts behind your front bumper to suck in colder, denser air for mid-range power gains. Lifetime Warranty.
Let your custom ride breathe through a truly custom air intake with the Volant Universal FabShop Full Intake Kit. Designed to let you custom configure your own intake design, this custom intake kit includes ducting, a filter, brackets, hardware and connectors. 1-year warranty.
Top off your DIY CAI with the Airaid U-Build-It Cold Air Dam Performance Airbox. Including an air dam, top panel, mounting hardware, filter adaptor and a high-performance air filter, this custom cold air box is the perfect addition to your custom intake. Limited Lifetime Warranty.
Not sure which 2008 Mazda 3 Cold Air Intakes are right for you? We have over 18563 customer reviews, with an average rating of 4.5, to help you find exactly what you're looking for. Here's what some of our customers have said:
"Pretty impressed. Immediately noticed a differerence in power and sound from 08 mazda3 2.0 I would definately recommend!" —Brandon W from Warner Robins, GA bought an Injen RD Series Cold Air Intake for a 2008 Mazda 3.
"I would recommend this intake to anyone who has a ms3 if u don't believe the dyno numbers you will when you install this cold air intake." —Harold S from Rio Rancho, NM bought an Injen SP Series Cold Air Intake for a 2008 Mazda 3, Mazdaspeed3.
"If your serious about tuning your ride I highly recommend you purchase AEMs CAI.. Great sound, appearance and performance. I haven't had it installed long enough to tell if I'm getting better mpg, but there is a noticeable hp increase right from install, and I suspect an increase in mpg once I get a few tanks through. I did the install myself and it was not to bad. The hard part was removing the factory air box. Total install took about 3 hours(2.5 of that was removing factory air box)." —Aaron B from New Castle, PA bought an AEM Cold Air Intake System for a 2008 Mazda 3, s.
"If you're having doubts about enjoying a Cold Air Intake system, your doubts will stop with the Injen RD series CAI. This is the best and gives the vehicle a pleasant lift in horsepower. Doesn't sound like a bee or loud street racer. Just plain fast and more Zoom Zoom for my Mazda3" —Stephen W from Eagan, MN bought an Injen RD Series Cold Air Intake for a 2008 Mazda 3, 2.0L 4-cyl. engine.
"Since installing my FIPK on my 2004 Dodge Ram, I have noticed an obvious increase in horsepower and fuel mileage. It looks ominous under the hood, and when I punch it, the sound is awesome. Thanks for a great product." —Manny N from Rio Rico, AZ bought a K&N 57 Series FIPK Air Intake (Fuel Injection Performance Kit) for a 2008 Mazda 3, 5.7L Hemi.
"This intake gave me the best bang for my buck. at crusing speeds it lowered my engine noise, but when i punch it i get a nice throaty sound. my gas mileage has gone up a lil bit now that ive stopped flooring it off each light haha. it took some time to put in, but it was still very easy. I couldnt have been happier!" —Adam Z from Medford, NJ bought a K&N 69 Series Typhoon Intake Systems for a 2008 Mazda 3.
"Injen Intake went on easier than I expected in about 2 hours everything was bolted on aligned an tested. The difference is noticeable instantantly when the car is driven. GREAT INTAKE HIGHLY RECOMENDED!!!" —Jose N from Naguabo, PR bought an Injen RD Series Cold Air Intake for a 2008 Mazda 3.
"After a shipping delay, my intake arrived and I installed it in about 2.5 hours (took my time, followed included directions). Completed without much headache. I expected more of a "whoosh" (had an intake on my previous car, which had a V6), but overall, sounds nice through the low and middle part of the power band; not much sound difference in higher revs. "Butt dyno" reveals a little bump in power and better throttle response. Happy with my purchase!" —Justin T from Saint Paul, MN bought a K&N 69 Series Typhoon Intake Systems for a 2008 Mazda 3, 2.3L 4-cyl. engine.
"I have a Mazdaspeed3 2008 and I just installed the AEM cai and it runs incredibly!!! I was amaized of the instant power that you receive under the wheels. Oh and by the way this last Sunday night I beat the heck out of a Mustang Cobra I believe the Cobra model was a 2005. I have more mods installed but still!!! and my car is only a 4 cylynder!!!!" —Alan Lopez L from Silver Spring, MD bought an AEM Cold Air Intake System for a 2008 Mazda 3, Mazdaspeed3, 2.3L turbocharged 4 cyl. engine.