Reviewed By Terry R (AUSTIN, TX) Reviewed for a 1997 Ford Mustang —7/21/2015 6:35 AM
Pretty easy to install. Suggest replacing the TPS sensor as well. The EGR valve was the worst to detach / re-install.
Reviewed By Randall L (Middlesex, NC) Reviewed for a 2002 Chevy Corvette —9/10/2013 4:28 PM
Supplied throttle body bolts were too long. Removed 1 cm off the top bolt because it extended out onto the EGR block off plate. Removed .5 cm off the bottom bolts because they bottomed out in the intake before snugging up the throttle body. The shoulders of the intake bolts extended below the intake itself. I used a die to cut the threads up .5 cm on the shoulder. Intake = 85cm Throttle body = 80cm Supplied gasket = 79cm Called BBK - was told "no one else has complained about it"