Power-up your truck or SUV with the behemoth K&N 63 Series AirCharger High-Flow Intake Kit. This cold air intake couples K&N’s biggest Filtercharger with a cool air tube for insane gains in horsepower and torque. Million Mile Limited Warranty.
Got a good grip on your wheel? Good. Because the aFe Cold Air Intake is going to take you on a wild ride. This cold air intake rams performance-inducing air down your combustion chamber’s throat to take power to the max. Lifetime Warranty.
K&N 77 Series Metal Intake Kits boost power and don’t skimp on style. These cold air intakes team famous K&N performance with a smooth metal intake pipe you can’t stop drooling over. Available in Polished or Gunmetal Grey. Million Mile Limited Warranty.
Replace stock parts with an Airaid Intake System. This easy-to-install cold air intake system delivers instant throttle and torque, plus boosts MPG for the conservative driver. Cold air intake comes with or without intake tube. Lifetime Warranty.
Unleash your engine’s true power potential with a Volant Cold Air Intake. These cold air intakes increase airflow to take horsepower and throttle response to the max. Get yours with a performance or oil-free PowerCore® air filter. 1-year warranty.
Force-feed cool, power-boosting air directly into your gas or diesel engine with an AEM Brute Force Air Intake. This custom-engineered cold air intake is tuned to ramp-up horsepower and torque. Dryflow oil-free air filter for less mess. Lifetime Warranty.
Injen pumped a decade's worth of blood, sweat and gasoline into designing the Power-Flow—the world's first tuned cold air intake system. From its hi-flow air filter to its Mega Ram tuning, this intake is built for wild performance. Lifetime warranty.
With RBP Cold Air Intakes, you don’t just boost power–you boost style. Silicone connectors and high-performance air filters make these cold air intakes perform. But, the real treat is a polished aluminum lid embossed with RBP’s wicked logo.
Let your custom ride breathe through a truly custom air intake with the Volant Universal FabShop Full Intake Kit. Designed to let you custom configure your own intake design, this custom intake kit includes ducting, a filter, brackets, hardware and connectors. 1-year warranty.
Top off your DIY CAI with the Airaid U-Build-It Cold Air Dam Performance Airbox. Including an air dam, top panel, mounting hardware, filter adaptor and a high-performance air filter, this custom cold air box is the perfect addition to your custom intake. Limited Lifetime Warranty.
Not sure which 2013 Toyota Tacoma Cold Air Intakes are right for you? We have over 18563 customer reviews, with an average rating of 4.5, to help you find exactly what you're looking for. Here's what some of our customers have said:
"This is a nice intake with good performance and sound gains. Takes a little effort to install because of the relocation of the factory air pump to the front of the engine bay. Make sure the included wire connectors grab tight as you will have to stretch the new wire to connect it to the old harness. If one wire comes loose you will get error codes CEL and Trac off on start up." —Ralph C from Albuquerque, NM bought an Airaid Intake System for a 2013 Toyota Tacoma, 4.0L V6.
"Installation of this kit was very simple. And the quality product was unbeatable. I'm glad this site offers bill me later, it allows me to upgrade my truck and still have money in the bank. This was a great buying experience at Autoanything." —David C from Ruston, LA bought an Airaid Jr. Kits for a 2013 Toyota Tacoma.
"Looks good, no big change in sound at partial throttle, at wide open it produces a nice roar. Be careful with plastic hose fittings, I over tightened one, but K&N sent me a new one, no problem." —Mitchell M from Winter Park, FL bought a K&N 77 Series Metal Intake Kit for a 2013 Toyota Tacoma.
"It took longer to remove the original equipment than it did to install new K & N Intake Kit. Went together just fine and works great." —Bill M from San Antonio, TX bought a K&N 77 Series Metal Intake Kit for a 2013 Toyota Tacoma.
"It sounds great and I can feel a little extra kick out of it. The throttle response is better and its looks good. Afe made another good product!" —Kyle I from Carmichael, CA bought an aFe Cold Air Intakes for a 2013 Toyota Tacoma, 4.0L V6.
"The installation was layed out step by step and was very easy to follow. The first time I drove the truck after installing the K&N Kit and to this day I can feel the addition horse power the truck has. As an indicator to the difference it made, I use to shift from 3rd to 4th at around 40MPH. With the K&N kit installed it shifts from 3rd to 4th at around 45MPH." —Tim B from Bethel Park, PA bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2013 Toyota Tacoma, 4.0L V6.
"I think this is the easiest power add on to install every. fuel milage differance and instant powerin about 30 mins." —Craig R from Surprise, AZ bought an Airaid Intake System for a 2013 Toyota Tacoma.
"I really like the intake, sounds good when you want to hear it, but when idling or at low rpm its nice and quiet. Haven't seen a difference in fuel economy but the truck definitely breathes better. The installation took about an hour longer than it said, and if you can get a friend to help out do it. Overall its a great product you won't be disappointed." —Ryan S from Bend, OR bought a K&N 63 Series AirCharger High-Flow Intake Kit for a 2013 Toyota Tacoma.