JBA Cat4ward Headers

sounds good :]

Posted on 04/10/2007 by Deborah B. - 1998 Ford F150 (Albany,KY)

0 of 2 people found the following review helpful.

"im not real sure how much diffrent the sound was changed from the headers beacause i also took the cats off at the same time. But all together Borla exhaust,no cats and headers on my 5.4 sounds really good. And i also got duel electric cut outs and put them right under the headers now that sounds real good. But if your got an f-150 taking the cats off will drop your power some so i got a supercharger to make up for it and more ;]"

Was this review helpful? Yes No

Awesome

Posted on 04/10/2007 by Adrian A. - 2005 Nissan Frontier (Miami,FL)

2 of 2 people found the following review helpful.

"My Truck runs great, the install on my 05 nissan frontier wasn't easy but it was worth it."

Was this review helpful? Yes No

Great Product

Posted on 04/03/2007 by Jeff S. - 2002 Chevy Blazer (Ridgefield,WA)

4 of 4 people found the following review helpful.

"Stupidly expensive, even at AutoAnything prices. The dollar per horsepower ratio is very high, but... they provide a good increase in power, weren't a big challenge to install and the ceramic ones look great. Even though I was able to skip a couple of the install steps on my '02 Xtreme Blazer, it takes about 8 man-hours but it's worth it. Everything bolted up as advertised with no leaks."

Was this review helpful? Yes No

06 daytona charger

Posted on 12/18/2006 by Carlos E. - 2005 Dodge Ram (Pleasanton,CA)

2 of 3 people found the following review helpful.

"headers made a nice differance, no complaints here"

Was this review helpful? Yes No

TOYOTA TUNDRA V8 2000

Posted on 12/12/2006 by Joseph D. - 2000 Toyota Tundra (Chula Vista,CA)

4 of 4 people found the following review helpful.

"THES HEADERS ARE GREAT. IT TOOK APPROXIMATELY FIVE HOURS, BUT WAS ALL WORTH IT. MY TRUCK IS VERY RESPONSIVE NOW AND IT KICKS BUTT COMBINED WITH THE CAI AND THE JBA EVOL EXHAUST IT SOUNDS FREAKIN MEAN! HIGHLY RECOMMEND IT DUDES!"

Was this review helpful? Yes No

Said what they did, did what they said.

Posted on 11/17/2006 by Robert R. - 2004 Pontiac GTO (Calabasas,CA)

5 of 6 people found the following review helpful.

"Bought JBA Cat4ward headers for my 2004 GTO. Perfect fit, right away felt HP boost and had definite MPG improvement. Totally satisfied."

Was this review helpful? Yes No

Matt

Posted on 11/14/2006 by Karen K. - 2000 GMC Jimmy (Mundelein,IL)

0 of 0 people found the following review helpful.

"They were more difficult to install than I anticipated. It took about 10 hours to install and you have to get new spark plugs and adapt them. At the end it is totally worth the time. I am very pleased with them. It sounds nice and runs very well. You can tell a big difference in power."

Was this review helpful? Yes No

Decent for 2005 KC Frontier

Posted on 11/09/2006 by James E. - 2005 Nissan Frontier (Honolulu,HI)

2 of 3 people found the following review helpful.

"Got these installed a week ago and what a difference these things make. The truck has more power for sure and is alot more responsive. Installation a took longer than the suggested 6 hours, but once the bolts are off, it all good. Can't tell yet about milage increases."

Was this review helpful? Yes No

1997 GMC Jimmy

Posted on 10/12/2006 by Daniel R. - 1997 GMC Jimmy (Lakeland,FL)

3 of 4 people found the following review helpful.

"I don't really know their specific impact on my car's performance because I installed a K&N Intake, Hypertech Reprogrammer, the headers, and a JBA Cat-back system all at the same time. But all in all, huge performance gains. Installation...don't be ingnorant and read the instructions. Between me and my brother, it took us probably 10 hours on the high side to install everything, mostly because we thought we knew better than the instructions. Definitely get this product though, you won't regret it"

Was this review helpful? Yes No

HEADERS

Posted on 09/21/2006 by Brian S. - 2005 Toyota Tacoma (Apple Valley,CA)

2 of 5 people found the following review helpful.

"WELL NOW THAT I GOT THE HEADERS INSTALLED FOR A LOW PRICE OF 300 BILLS I AM STOKED I DID IT. THE SOUND IS ABOUT THE SAME BUT THE POWER, OH MAN LET ME TELL YOU ABOUT THE POWER, IT INCREASED IT A LIL BIT. NOW I WILL SMASH ON ALL THOSE LIL RICE BURNERS OUT THERE. THE ONLY THING LEFT TO SAY IS BRING IT ON BABY WHOO WEEE!!!! NOW I HAVE TO WAIT ON THE SUPERCHARGER TO COME OUT HEE HEE. AS FOR NOW IM SIGNING OUT. SEE YOU FELLAS AT THE TRACK, ILL BE THE GUY SMOKIN EVERYONE HAHAHAHAAH. PEACE"

Was this review helpful? Yes No

High quality

Posted on 09/05/2006 by Erik J. - 1989 Ford Bronco (Tracy,CA)

0 of 0 people found the following review helpful.

"The products are high quality but hard to install the last bolt on the passenger side. I got an 89 Ford Bronco and the last bolt on the passenger side was impossible so i just put a stud through there. Headers lined up to Y-pipe PERFECTLY and now sound and feel great."

Was this review helpful? Yes No

JBA Headers

Posted on 08/01/2006 by Jason M. - 1996 Ford F250 (Wilsonville,OR)

0 of 0 people found the following review helpful.

"Very tight install, took a whole saturday. Once installed, no problems so far, the gaskets that are included are great, however the hardware included is not all used, some stock manifold bolts have to be reused. A definite notice in increased power, but no difference in fuel mileage."

Was this review helpful? Yes No

JBA Cat4Ward for 4.0L Mustang

Posted on 07/28/2006 by David H. - 2006 Ford Mustang (Orlando,FL)

2 of 2 people found the following review helpful.

"The headers went on quite easy with little difficulty. I've felt a little bit of gains with them and I can hear the engine alot better with them on and it seems rev a bit quicker. I'm happy to have only paid $589 for them instead of $640 because I don't think they are worth THAT much. I'm very happy with them though and they should come in handy MUCH more with an F/I."

Was this review helpful? Yes No

I recommend my new jba headers

Posted on 06/29/2006 by Ron S. - 2006 Toyota Tacoma (Sacramento,CA)

3 of 3 people found the following review helpful.

"Once installed, I did noticed the difference in performance after I had the original stock manifolds replaced. I noticed a quicker responce on the vehicle. As far as horsepower goes, I don't know how much improvement yet. Having said that, I still would recommend these headers. The only down side is that you would have to spend extra cash to have someone weld the headers. I don't weld, but I had ABC muffler install and weld the headers for me for $200."

Was this review helpful? Yes No

JBA Headers 02 Ranger 3.0l

Posted on 06/26/2006 by Jeremy W. - 1992 Toyota Pickup (Poway,CA)

1 of 1 people found the following review helpful.

"The sound is not too noticable, but there is a definate gain in power. These headers are worth the money! Be careful and make sure you get the right ones. If you don't have they EGR don't get the ones with it or vise versa..."

Was this review helpful? Yes No

Great sound and power

Posted on 06/23/2006 by Jeremy A. - 1992 Ford Ranger (Lake Havasu City,AZ)

1 of 1 people found the following review helpful.

"I got these on my truck and the sound is pretty cool especially when I accelerate fast. I have noticed a gain in power also. The titanium ceramic coating looks great."

Was this review helpful? Yes No

jba headers

Posted on 05/11/2006 by Ryan W. L. - 2006 Toyota Tacoma (Claremore ,OK )

2 of 3 people found the following review helpful.

"the headers work great better sound deeper tone i love them"

Was this review helpful? Yes No

Sounds good but, a pain in the a$$

Posted on 04/26/2006 by Jeremy P. - 2002 Toyota Tacoma (Old Bridge,NJ)

4 of 4 people found the following review helpful.

"Now that it's done I love them. The install however was ridiculously difficult. Not a do-it-yourself task. The ports needed to be ground down to get them round but the flanges lined up perfectly. If you have the time and the tools, alot of tool, I'd say do it."

Was this review helpful? Yes No

Sweet headers

Posted on 04/18/2006 by Matthew S. - 2000 Toyota Tundra (Everett,WA)

0 of 0 people found the following review helpful.

"Sound and feel great! Very easy to install and a great price!"

Was this review helpful? Yes No

JBAs, buy em.

Posted on 04/15/2006 by Mike D. - 2005 Ford Ranger (San Jose,CA)

2 of 2 people found the following review helpful.

"Great fit, the titanium ceramic color looks OEM. This is my second purchase. I have over 300k on another vehicle similar to this one with no problems to report. It wasn't about the power increase, as much as the sound on acceleration and deceleration. They do flow enough to warrant a re-flash on my current SCT tune. I would recomend them without hesitaion."

Was this review helpful? Yes No

JBA cat4ward Headers are Sweet!

Posted on 04/04/2006 by Gary D. - 2006 Toyota Tacoma (Corona,CA)

3 of 4 people found the following review helpful.

"Ordered the JBA Titanium Ceramic Cat4Headers and had a terribe time finding someone to install it. I thought it was a total Bolt On application but it needed to be welded in place and the first 3 places I went to wanted $560-$590 just to weld/install it! Finally by chance (went to 6 places) I found a Performance Muffler Shop that said they can do it for $240 they not only welded Flanges to the Headers they cut and welded Flanges before the Cat. As for the Performance of the JBA cat4ward Headers, I can immediately felt the difference. I barely tap the pedal and it goes. Too early to tell the savings in gas but it gave me a lot of Power and a strong tuff sound from under the hood but not to terrible. I also added Cold Air Intake System, Throttle Body Spacer and Performance Exhaust. I'm also getting a Programmer next. I hope it'll save gas and increase power when I need to Tow. Also I'm raising my Tacoma 6" with 35" Tires. Highly recommend the JBA Cat4Headers if you can find someone to either weld it in place or weld Flanges. Lata!"

Was this review helpful? Yes No

3.0 ranger

Posted on 04/02/2006 by Michael W. - 2001 Ford Ranger (San Mateo,FL)

2 of 2 people found the following review helpful.

"Noticed a great improvment as soon as I installed them!"

Was this review helpful? Yes No

ez install

Posted on 03/10/2006 by Raul C. - 1995 Dodge Dakota (Independence,MO)

2 of 3 people found the following review helpful.

"real happy, headers installed easy, stock exhaust alittle tight but bolted right up."

Was this review helpful? Yes No

JBA Catward Headers

Posted on 11/08/2005 by Logan M. - 2005 Ford F-150 (Scottsdale,AZ)

3 of 3 people found the following review helpful.

"They are lighter and more efficent at flowing the exhaust gas pressure. Truck seems slightly more nimble and the picture shown is not the actual headers, They are more like a "shorty" version."

Was this review helpful? Yes No

JBA CAT4WARD HEADERS

Posted on 10/27/2005 by Phillip F. (Roachdale,IN)

1 of 1 people found the following review helpful.

"The bolt holes could have been a bit larger. They were put on a 2003 S10 pick-up with 4.3L V6. The bracket that the instructions said was connected to the front exhaust head bolts on the left side, that bracket didn't exist. I can tell a difference when at speed, because I have a quicker pickup than before."

Was this review helpful? Yes No