Not sure which 2001 Ford F-250 Performance Exhaust Systems are right for you? We have over 7601 customer reviews, with an average rating of 4.5, to help you find exactly what you're looking for. Here's what some of our customers have said:
"This installation went very good on my pickup, (about 2 1/2 Hrs.), but went even easier on my friends pickup, (about 1 1/2 Hrs). If you aren't going to save any of your old exhaust, which neither of us did, take a sawzall and cut in front of the trans mount, in front of the muffler, and behind the muffler. Take the old system out. The toughest part is getting the clamp loose from the turbo.Loosen the turbo clamp from the top. Take a 3ft. crowbar in from the bottom, line up on the edge of the clamp with the angled end of the crowbar and give it a whack with a hammer. It will start the clamp loose and you can finish pulling it from the top. Pull your OEM rubber mounts, spray with WD-40 or use soap and re-install the new system. I really like these KISS projects! (Keep it simple stupid) The system sounds great when you're done." —Gary D from La Pine, OR bought a MBRP Exhaust Systems for a 2001 Ford F-250, 7.3L Power Stroke.
"Easy installation very quiet if you want a stock sound. Wish it was a little louder for a more agressive sound otherwise good exhaust" —Dean S from New Britain, CT bought a Borla Exhaust Systems for a 2001 Ford F-250.
"I had mine professionally installed due to the tight space at the turbo and the care needed to get that section correctly aligned. Love the boost in power it has delivered along with the S&B cold air intake. If I can keep my foot out of the accelerator I think the mpg will improve." —Thomas M from Columbus, OH bought a MBRP Exhaust Systems for a 2001 Ford F-250, 7.3L Power Stroke.