Reviewed By Mark S (Mesquite, TX) Reviewed for a 2004 Honda Accord —4/13/2006 9:24 PM
The 2 pc. stainless header is nice to look at, but that's not why I bought it for my '04 Accord. It added more torque across the board, which was especially noticeable at around 2500-3000 rpm, due to my short ram intake rolling some torque off in that range. I would highly recommend it to anyone with an aftermarket intake. The collector size seems a tad small compared to the catalytic converter's inlet, but proof is in the peformance. The quality is very good but not perfect. While most of the welds were cleaned up nicely inside and out, the separate metal o-rings that ship with the header get dinged some because of not being secured inside the box. The parts bag is allowed to slide around. However, all necessary hardware was in the box to bolt right on, including the OEM-quality extension wire for relocation of the o2 sensor. I'd buy again.