Reviewed By Dennis F (West Chester, OH) Reviewed for a 2009 Toyota RAV4 —10/31/2008 3:50 AM
The tip is heavy and appears to be very good quality. It installed in about two minutes. It looks very nice.
Reviewed By Ronald B (FREMONT, MI) Reviewed for a 2001 Toyota Tacoma —2/27/2015 9:04 AM
Highest quality for great looks. AA beats best advertised price the can confirm. I preferred to cut off clamp and weld on - a little cleaner and permanent, trouble-free installation. Chose to weld scrap length of thick 1/8" wall 3" OD exhaust pipe to shim from stock exhaust 2.75" OD to 3" tip ID.
Reviewed By John E (Winchester, WI) Reviewed for a 2014 Toyota Camry —1/31/2015 4:14 AM
This is a well made, solid, and attractive trim piece. The pinch-bolt mounting makes it easy to use. I needed to fabricate a shim to make it secure on the tail-pipe of my Toyota Camry. This is not a criticism of the part itself, but due to the diameter of the tail-pipe being slightly smaller than 2.25 inches. The four star rating stems from the fact that the supplied bolt and nut were just slightly on the small side. I replaced them with slightly stouter bits from my left-over hardware drawer.