Reviewed By Johnny G (Spring, TX) Reviewed for a 2010 Toyota Tacoma —5/4/2010 7:09 AM
I had to cut OEM exhaust pipe to get this tip install. This was exhaust went on a Tpypta Tecoma DCab TRD 2010 V6.
Reviewed By Gareth R (Houma, LA) Reviewed for a 2008 Toyota Tacoma —2/3/2010 5:24 AM
Welding process used in the attachment of the internal fins caused "dimples" to appear in areas where the tack welds were excessive. Would suggest using the "tig" process instead of the "mig" process in the attachment of these fins. This would make for a better, flatter tack weld and eliminate the "dimpling affect" on the outside circumference of the finished and polished tube.
Reviewed By David B (Bessemer, AL) Reviewed for a 2005 Toyota Tacoma —4/9/2008 8:51 PM
I really like this tip because it's not too large as to draw much attention, but not small enough to look cheesy. I put it on a 2005 Tacoma, waaay better quality than the Toyota accesory tip offered at some dealerships. Complements the vehicle nicely. Being stainless, it should be easy to polish and keep clean. Not too loud, either, with no tinny, rasping I've encountered with others. The built-in hidden clamp is downright cool.