Here's a GREAT TIP...
Reviewed By Ronald B (FREMONT, MI) Reviewed for a 2001 Toyota Tacoma —2/27/2015 9:04 AM
Highest quality for great looks. AA beats best advertised price the can confirm. I preferred to cut off clamp and weld on - a little cleaner and permanent, trouble-free installation. Chose to weld scrap length of thick 1/8" wall 3" OD exhaust pipe to shim from stock exhaust 2.75" OD to 3" tip ID.
No Customer Support, poor quality control
Reviewed By Walter H (Anderson, SC) Reviewed for a 1970 Nissan 240Z —2/21/2015 12:00 PM
1st after encountering 3 assembly problems, I sent PaceSetter CS e- mail and got no response. My issues were: Extension section failed to mate with header.One pipe would only go into the other partially needing full welds. 2nd, the header manifold is 3/8" and the 240Z manifold is 0.6". The adapters were incorrect and required new parts which never came. After no response to my e-mail, I ground .125" off each one. Lastly,the manifold adapter failed fit over the studs without further grinding.