Reviewed By Thomas T (Tyngsboro, MA) Reviewed for a 2010 Toyota Tundra —3/9/2010 7:56 AM
I used the screw-down installation method as the clip method does not provide a super-tight installation. This trim is made for 2007-2009 Tundra but with a bit of clipping under the wheel wells with the tin snips, it fit my 2010 Tundra perfectly. There are a few places under the wheel well where the cut-outs in the trim didn't exactly line up with the bumps/bolts under the well. It's not noticable when looking at the trim from the side and doesn't affect appearance one bit. If you don't want to make any mods, I would recommend that you wait until TFP makes one that fits the 2010 Tundra. I also had to modify the factory mud-flaps a bit on the Tundra but they still fit tight against the fender trim. The bolt holes on the flaps need to be moved a little but since it's plastic, it's not too tough to do.