Reviewed By douglas s (HUNTINGDON, PA) Reviewed for a 2005 Chevy Colorado —8/21/2014 8:19 PM
Installation was easy because of the instructions were dead on. Brackets were a perfect set up.
Reviewed By Ed S (Plymouth, MI) Reviewed for a 2005 Chevy Colorado —1/2/2012 11:39 AM
This was an easy install for my '05 Colorado. I was able to do it all by myself. This was shipped via UPS Freight and they contacted me to setup delivery of which I ended up picking it up at their depot due to the safety issue of parking a 53' trailer on the two-lane highway in front of my house (was my advice). This is NOT a gigantic unit in its shipping packaging and can be transported by any size pickup. The latest revision is model 4080 for the Colorado/Canyon series of trucks. I don't know what the difference is between the other version. You don't have to remove the air valance that is on the bottom of the front bumper, just hold the vertical main brackets to where they will go and then cut the valance with a cutoff wheel or with a razor blade. Make extra room for the actual vertical part of the bumper that bolts to the bracket (I can't remember if it was on the inside or outside). You'll only need to cut about a 1/4". Obviously you have to remove the plastic splash/skid plate before you do any of this AND you will have to trim that to make it fit after installing the guard. I didn't have any crossbeam to remove as the instructions insisted (I think it is for later models). The top brackets mount to existing vertical front bumper bolts which only need to be loosened a bit to accommodate the brackets. Otherwise, KEEP THE BOLTS LOOSE when mounting so you can later get the entire assembly centered. When all is good, tighten everything up to German torque standards, "Gutentite" (no actual torque spec is mentioned in the instructions). Yes, I did this all by myself and it was slightly a pain but I fastened the top bolts first AFTER making sure the bottom brackets were correct. Later I mounted up two KC 130 watt Daylighter lights from AutoAnything.com. Search the internet forums for information on how to wire the KC lights up so that they will turn on with the high beams. Now I have a squirrel-squashin', deer-smackin' drivin' machine!
Reviewed By Anthony M (Canyonville, OR) Reviewed for a 2005 Chevy Colorado —4/23/2008 6:34 PM
GRILL LOOKS GREAT ON THE TRUCK AND HAVE NO AWARENESS THAT IT IS THERE ON THE FRONT WHILE DRIVING. ORGINALLYY CONCERNED THERE MAY BE VIBRATIONS AT HIGH SPEEDS BUT THIS IS NOT THE CASE. GOOD VALUE.