We’re sorry. The information you have requested is temporarily unavailable.
Rigid Industries SR-Q Back-Up Light Kits Part #980023 Customer Reviews
9 Customer Reviews
Reviewed by Brett B (Oklahoma City, OK) Reviewed for a 2017 Jeep Grand Cherokee — Nov 05, 2016 10:39 AM
Love em. Perfect. I got the back up floods with diffused lenses. Extremely bright even with smoke covers on. At least 4 to 5x illumination of stock reverse lights. Weird reverse camera view is not enhanced by the extra light. It is obviously brighter but the rv camera has a little night vision. Mounted to Bully hitch step. Pay for the pro install if you are a rookie like me. It is worth it to have the harness ran inside the car instead of underneath. Installed on 2017 Jeep Grand Cherokee.
Reviewed by vincent y (edison, NJ) Reviewed for a 1998 Chevy Tahoe — Jul 09, 2016 12:46 PM
I was amazed at the amout of wires that came with the lights .it was an easy install if you know how to wire it up . I had it mapped out then it was all smooth sailing . All I had to do was make the connections & some angle adjustments that was needed. Pictures was taken in the afternoon the lights looks very bright ,can you imagine how much brighter at night.
Reviewed by Gerard A L (BRONX, NY) Reviewed for a 2002 Dodge Dakota — Oct 11, 2015 8:11 PM
I used these lights to replace a set of back up lights that I installed 6 years ago on my 2002 Dodge Dakota that still worked but had dimmed due to water and rust setting in.These lights are awesome like having rear driving lights.These lights are high quality and very well made compare to the lights I replaced. I did not use the wiring harness that came with it because of the existing wiring from the other lights. Great product well satisfied.
Reviewed by Jason S (MONT ALTO, PA) Reviewed for a 2008 Ford F-150 — Mar 17, 2015 9:04 AM
I know these lights are pricey compared to cheaper knock-offs, but they are very high quality and come with a complete harness and 3 way switch. Install was straightforward, but TEDIOUS as expected. Now I think my reverse lights are brighter than my headlights! I can see everything behind me and couldn't be happier with the purchase! If you have the same problem I had, these lights are your solution!
Reviewed by Leslie T (Reno, NV) — Jan 30, 2015 10:52 AM
Lights were fairly easy to install with a couple of exceptions; instructions were easy and straight forward instructions. Most difficult part of install was getting wiring through the firewall. This vehicle has no empty grommets, thus had to go through existing. No room for the loom through firewall grommets, had to modify install and mount relay on outside firewall and feed switch wiring through main loom grommet. Tied in switch to reverse lighting in main loom in back.
Reviewed by John A (Cincinnati, OH) Reviewed for a 2011 Ford F-150 — Jan 08, 2015 5:51 PM
These lights really illuminate the back-up area of my F150. Easily installed under the bumper by removing factory bolts and replacing with the mounting hardware. I zip-tied the harness to the factory wiring harness along the frame rail, and fed the harness through the main rubber grommet on the firewall. To locate the reverse wire, pull off the factory tail lights and see what color wire is goes to the reverse light. Then locate same color wire in the door threshold wire harness and attach.
Reviewed by Jimmy B (RAGLEY, LA) Reviewed for a 2013 Ford F-150 — Nov 20, 2014 9:50 AM
I installed them on my 2013 F-150. They work great but the only problem I had was one of the lights quite working about 1 week after install. The wires had worked them selves loose from from the female connection on the back of the light. Only about 3mm of wire was holding it together. Auto Anything sent me a new set and I haven't had an issue yet with the replacement. Maybe I just got a bad one.
Reviewed by Nigel L (MEDFORD, OR) Reviewed for a 1999 Ford F-250 — Sep 10, 2014 7:37 AM
Lights seem to work well. HOWEVER, this is NOT a "plug and play" installation. The instructions for mounting the switch are WRONG - they should read "drill a 3.4 " hole where you want to mount the switch, then run your wires through the hole from the back, connect to the switch per diagram, then push switch into the hole", the wire length for the 12v + and - lines are much too short (had to purchase additional wire and solder extensions). Routing harness instructions could be better.
Reviewed by Ed B (Bothell, WA) Reviewed for a 2014 Jeep Wrangler — Jan 31, 2014 8:30 PM
Purchased these to make up for the horrible stock back up lights on my JKU Rubicon. I mounted them using the Rigid tail light brackets. These things are awesome. They are diffused so they are not intended to act as a flood or spot but they still make it like daylight while backing up. I cut the relay and switch out and wired it straight into my SPOD. Plenty of wire length to run the length of my Jeep with tons of extra for longer vehicles. Super strong aluminum housing and sturdy lens
- 1-Year Lower-Price Guarantee
Ships Between 12/18 - 12/20
- Style:Standard mount
- Part #:980023
- Kit Includes:
- Two Back-Up Lights
- Plug-N-Play Harness with Switch
- Mounting hardware
- Two black covers with SR-Qs Only