If Anzo had built these they would know what and how they fit
The biggest problem, wrong connectors for a plug and play. If you do not have the tools to remove the pins out of the connectors just cut the wires and solder the wires together or put your own connectors on. The connectors that were installed on the lights are the wrong ones. I removed the pins out of my vehicle harness and then the pins out of the Anzo harness and then connected with heat shrink tubing over to protect. Also let a person leave the remarks on your page and not limit to 500 words
Instructions for Installation
I received one sheet that addressed wiring but that was incorrect. Turn signals, normal lights, and bights worked fine but the additional lights still not connected due to lack of instructions. The one page wiring instructions receive said to connect to car frame and this result in the additional blue lights never turning off. Need additional connectors and directions for connecting to the light wiring harness. Some additional help with light installation and adjustment after installation would be helpful.