Edelbrock Strut Tower Braces

Best value around, excellent quality and finish.

Posted on 09/04/2009 by Mark M. - 2005 Ford Mustang (Hooksett,NH)

1 of 1 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"Installation was involved, but of course the way the brace attaches to the car is why it is a superior brace. I question the idea of attaching it to the windshield pinch support and the firewall (which is flimsy) and if this is a good idea regarding safety (crumple zones)."

Was this review helpful? Yes No

Edelbrock Strut Tower Brace

Posted on 05/06/2009 by Jesse S. - 2005 Ford Mustang (Fredericksburg,IA)

1 of 1 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"This brace was one of the best money for performance mods that I have done to my car. I definitly would tac weld the nuts to the brace plate under the wipers. That way you wont have to take the wipers off every time you wanna take it off. Other than that its a great product for a great price!"

Was this review helpful? Yes No

Excellent product

Posted on 01/07/2008 by Robert Holt H. - 2006 Ford Mustang (Clinton Township,MI)

1 of 2 people found the following review helpful.

"Installed with little difficulty and improved the feeling of the steering and front suspension. The most difficult task is removing the wiper arms!"

Was this review helpful? Yes No

2006 MUSTANG

Posted on 04/20/2007 by Glenn A. - 2006 Ford Mustang (Farmingdale,NY)

0 of 1 people found the following review helpful.

"THESE STRUTS ARE SIMPLY THE BEST. MY CAR HANDLES BETTER AROUND TURNS WITH LESS ROLL. IT'S NOTHING BUT THE BEST FOR MY STANG. THAT'S WHY I CHOSE EDELBROCK....."

Was this review helpful? Yes No

best brace for the 05+ Mustang

Posted on 03/28/2007 by Jon D. - 2007 Ford Mustang (Takoma Park,MD)

1 of 1 people found the following review helpful.

"i had this installed by a performance shop in virginia. they told me it was the best looking and most functional brace they had seen yet. it looks awesome and is extremely rigid. it's the only 3 point brace I know of for the 05+ Mustang."

Was this review helpful? Yes No

It thightened up my 2006 RoushMustang!!

Posted on 10/10/2008 by Brian K. (Greensboro,NC)

1 of 1 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"This brace made a huge difference on my 2006 Roush Mustang!! (which was already a great handling car). It was a little tricky to locate properly and install due to the plate that mounts between the firewall and the pinch weld below the windshield in the wiper trough. I tack welded nuts to the plate behind the firewall so if I ever needed to remove the brace for engine work I wouldn't have to go back under the wiper cowl(seemed like a good idea). Maybe Edelbrock can improve that on the next design. It looks great!! It fits great!! I highly recommend this product!! Just be prepared to tinker with it a little to get the best fit. Brian K."

Was this review helpful? Yes No

Strut tower support

Posted on 05/08/2008 by Patrick S. - 2001 Chevy Camaro (Saint Petersburg,FL)

2 of 2 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"I have previously used this strut tower brace on my other Camaros and went right back to it again. Like it better than BMR and others. Hooks up with three points instead of two. Excellent value! Somewhat difficult when bolting it to the firewall and the mount on the drivers side take a little bit of work around the brake master cylinder but it will fit after a little bit of work."

Was this review helpful? Yes No

Edelbrock Strut Brace

Posted on 03/28/2008 by Dan W. (Lindenhurst,IL)

3 of 3 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"One of the best overall structural designs, not the easiest to install. Edelbrock instructions are incomplete. Be careful to note that the inner brace won't clear the wipers if it is not nearly horizontal so drill the firewall holes in the right place the first time. And the Edlebrock main tower bolts are 1/4" too short and not stainless steel."

Was this review helpful? Yes No

Strut Tower Brace on '05 GT Convertible

Posted on 06/28/2007 by Catherine H. - 2004 Subaru Forester (Somerset,MA)

2 of 2 people found the following review helpful.

"Heavy duty construction. Clears intake and hood. Noticed an immediate improvement in steering handling. Good product, great price."

Was this review helpful? Yes No

A great addition

Posted on 05/02/2007 by Benjamin S. - 2002 Chevy Camaro (Monterey,CA)

1 of 1 people found the following review helpful.

"I've experienced a substantial improvement in cornering. This thing is a great addition to my '02 Z28. The only real problem is that I'll need to remove the intake manifold (for this car) to bolt in the third point of contact. The windshield frame is in the way so I can't dill the additional holes. (other applications will differ) Despite this, the bar still fits. I am very satisfied with the brace, how it looks and performs. If you're thinking about it, just do it."

Was this review helpful? Yes No