Please answer the following questions before adding to cart to help us provide you with customized for your specific vehicle.
Ever feel like your air springs are staging a mutiny? Well, captain, regain control of the crew with the Air Lift Dual Load Controller System! This air spring control system from Air Lift delivers independent control to 2 air springs from a single gauge located in the cozy confines of your cab.
The dual-path control airs up both springs to prevent bottoming out, or to adjust springs independently for a level ride. Both inflate and deflate controls are located right on the dual-pressure gauge, meaning there are no gauge clusters or control panels dominating your dashboard. Plus, Air Lift includes a gauge mounting pod for easy installation.
Air Lift includes everything you need: gauge & mounting pod, wiring harness, air lines, connectors, hardware and your choice of standard- or heavy-duty air compressor. For safety, your Dual Load Controller is equipped with an automatic low-pressure sensor to fill the spring if pressure is too low. Even better, Air Lift backs your Load Controller Dual Gauge System with a 2-year warranty.
Reviewed by Richard S (Mission, TX) Reviewed for a 2008 Ford F-150 — Nov 03, 2011 10:44 AM
Good system, relatively easy to install. I was able to mount all components inside the vehicle. I have a 2008 Ford F150 and I mounted the compressor under the rear seat on the driver's side. I routed the wires and tubing from the under the dash to the rear of the cab by removing the plastic trim pieces that run along the door sill and placing wires/tubing in the existing wire trough. I only had to drill 2 small holes through the floor next to the seat belt attachment point and run the air tubing to the air bags. I used the grommet material supplied to protect the tubing from the metal edges of the holes and sealed the holes with silicon caulk. System is working perfectly.