Reviewed By yousef E (TERRELL, TX) Reviewed for a 2001 Chevy Astro —7/22/2013 8:31 PM
just what I was looking for.
Reviewed By LARRY F (Millington, TN) Reviewed for a 2003 Chevy S10 Pickup —5/22/2015 11:03 AM
Not that hard to install. Will need TIN coated drill bits because the frame is TOUGH. Fits good and keeps S10 Xtreme pickup level when pulling trailer. Truck rides good with 10 lbs of air pressure when empty, and never had to have over 50 lbs pressure when trailer was loaded down. A good buy, and will be better with the optional compressor kit
Reviewed By William K (Arlington, TX) Reviewed for a 2015 Ford F-250 —6/18/2015 9:08 PM
After reading the installation instructions, I decided the best place to install the system was in the truck bed. The system was assembled on a 8 inch by 12 inch aluminum plate and mounted to the front bulkhead of the bed on the driver side. The wires were run to the engine compartment and connected accordingly. The +12 volt wire via 15 amp fuse was connected to upfitter switch #1. This makes it easy to check everything except air bag connections without getting under truck.