Reviewed By John C L (Forest Lake, MN) Reviewed for a 2005 Chevy Silverado —9/15/2016 4:37 AM
works great, does exactly what suppose t. dresses up cab... I would recommend...
Reviewed By Robert H (OLD SAYBROOK, CT) Reviewed for a 1986 Chevy S10 Pickup —9/12/2016 8:58 PM
I did a custom install, adding nylon spacers and rubber grommets to the bottom of the pump to raise it up on its mounting point and wire loomed everything. It's not silent gassing up, the motor sounds tiny/weak, but it doesn't take long to go from 5lbs to 70lbs and degassing the system when I drop my load always gets looks. Install was 8 hours including running parts. Directions were helpful, but if you want a tidy install there is a lot to consider that makes it more than an hour and a half.
Reviewed By Charles B (PORT ALLEN, LA) Reviewed for a 2016 Dodge Ram —9/7/2016 6:34 AM
Quality product. Installation took me about 4 hours and this was my second one I installed. I installed the gauge/control switch in the console of my 2016 Ram 2500 and the compressor under the back seat mounted on a 3/4" piece of wood. Wiring and air line to the controller from compressor routed under seat, under kick plate/carpet. Tubing from "T" through hole drilled in floor under back seat to the air bags along with wire routed through frame to the battery where the in-line fuse was installed