Reviewed By Robert B (GOODYEAR, AZ) —6/30/2015 9:08 PM
The perfect height for a lowering ride..a little more of a firm ride than stock oem...who wants stock ?
Reviewed By William K (Arlington, TX) Reviewed for a 2015 Ford F-250 —6/18/2015 9:08 PM
After reading the installation instructions, I decided the best place to install the system was in the truck bed. The system was assembled on a 8 inch by 12 inch aluminum plate and mounted to the front bulkhead of the bed on the driver side. The wires were run to the engine compartment and connected accordingly. The +12 volt wire via 15 amp fuse was connected to upfitter switch #1. This makes it easy to check everything except air bag connections without getting under truck.
Reviewed By Dewayne C (WEATHERFORD, TX) Reviewed for a 2015 Ford F-350 —1/22/2015 9:31 AM
Once installed the system works excellent. Installation wasn't difficult however there is a lot of under the vehicle work required due to the crowded engine compartment. On a 2015 F350 there is absolutely no place for the pump or ECU in the engine compartment. The only other compliant would be, using the Android app, there is no air pressure gauge.