Reviewed By Van S (DAVENPORT, IA) Reviewed for a 1995 Ford Ranger —6/15/2017 2:20 PM
Was a Lot of ingenuity getting them on the truck.
Reviewed By Alan G (LAKE ELSINORE, CA) Reviewed for a 2003 Ford Ranger —4/4/2017 7:54 AM
Using to level a towed trailer and tow vehicle (XLt, x'tended cab, 4.0L V6). The best point is the shocks hold there air, no leaks! A superior 1/8 inch tubing connection and fittings to the shocks. The plastic Schrader valve is junk. Used the vehicles already installed brass and push connector hardware. Damping seem to be a little over damped on the rebound and under damped on compression; this is good, we get no excessive bouncing up and down and the bumps don't jar.