Reviewed By Brendan C (Alexandria, VA) Reviewed for a 2002 Jeep Liberty —8/10/2010 8:51 PM
If you're installing these yourself like I was, you may find it difficult to get the bushings into the housing rings. I had to use a vice, improvised plastic cup (from a storage shelf unit), and some patience to get those things in. Also, there are two metal bolt sheathes included for each side... make sure yours fit before you install them into the bushing otherwise you're going to have a headache when you go to bolt on the shocks. I had one that was about 1mm off and I had to push the other one through... not fun. Other than that, these awesome shocks. Takes corners in my Liberty like a breeze (I do have a 2.5" lift, don't buy these if you don't!). I replaced my coils at the same time (not Skyjacker coils, though).