Reviewed By Jose N (Washington, NJ) Reviewed for a 2002 Toyota MR2 —10/11/2016 4:14 AM
Set these up with kyb struts, much tighter feel...makes lane changes quick, like a go cart..def recommend.
Reviewed By Dann P (BATTLE GROUND, WA) Reviewed for a 1988 Toyota MR2 —4/16/2015 8:13 PM
Wanted to lower my classic 1988 Toyota MR2. Used these in combination with Koni Yellow shocks. Combination is perfect. Lowered 1" and the ride is nicely firm with shocks set to medium - 360 degrees on the knob. Installation wasn't too bad as you have to disassemble the old struts. Messy, but easy enough. Fast delivery from AutoAnything. Couldn't be happier. Really.
Reviewed By Lee S (Lodi, NJ) Reviewed for a 2014 Toyota Tundra —2/19/2016 7:49 AM
Installed this about 2 weeks ago. Running the wire and air hoses was the biggest time consumer of project. Mounted pump in cab becuase I did t think it would hold up to the weather under the truck. There was just enough wire and hose to complete the job. ( had 3' left over so be careful). I don't care for the fuse connector for the power but it does work. I can Raise the level of the bed about 2". My recommendation it to make a good plan as to where you will be mounting and running all pa
Toyota MR2 Base Suspension Systems
Toyota MR2 Standard Suspension Systems
Toyota MR2 Turbo Suspension Systems