Reviewed By Richard S (Stockton, CA) Reviewed for a 2011 Toyota Tacoma —10/2/2011 8:13 AM
1. Directions on where to put the new nuts verses the OEM nuts on the upper strut mount should be more specific. If you put the OEM nuts on the top in the original position it is easier to get the socket with torque wrench on them. 2. Wrong size stated for front differential spacer bolts. 3. Had to cut and trim left front radiator support bracket to give clearance for the front differential mounting bracket after installing the one inch spacers. 4. No spacers or bolts where provided for the front shield/pan on the factory TRD models. 5. It would be nicer on the bolts that were supplied for the center pan to have all bolts the same size instead of the ones you supply takeing a #13 socket and the OEMs taking a #12 socket.