Reviewed By jeffrey s (Parker, CO) Reviewed for a 2000 Ford F-150 —8/27/2012 8:51 PM
Straight forward easy install. Finish was flaking off in places and bolt heads rusted quickly. Easily cleaned off and sprayed with Rustoleum to protect
Reviewed By Randall B (Jacksonville, FL) Reviewed for a 2000 Ford F-150 —7/19/2012 6:50 PM
This kit arrived in two boxes at about 50 lbs each. The front of the kit was pretty easy to install. The rear of the was a different story. Removing the front hangers for the rear suspension was a royal pain, I used an air cheseal to remove the tops of the rivits. That was not bad, but after that I still needed to drill out the four rivits on each side. These things were about 1/2 inch in diameter so it took awhile to drill through them. After getting the front hangers off the truck every thing else went on without to much trouble. Overall the was well worth it and I would buy from them again. This kit was installed on a 2000 Harley F-150.