Reviewed By Stanley C (Yuma, AZ) Reviewed for a 2008 Ford F-150 —7/22/2015 12:16 PM
It was easy to install and looks great
Reviewed By Richard S (Mission, TX) Reviewed for a 2008 Ford F-150 —11/3/2011 10:44 AM
Good system, relatively easy to install. I was able to mount all components inside the vehicle. I have a 2008 Ford F150 and I mounted the compressor under the rear seat on the driver's side. I routed the wires and tubing from the under the dash to the rear of the cab by removing the plastic trim pieces that run along the door sill and placing wires/tubing in the existing wire trough. I only had to drill 2 small holes through the floor next to the seat belt attachment point and run the air tubing to the air bags. I used the grommet material supplied to protect the tubing from the metal edges of the holes and sealed the holes with silicon caulk. System is working perfectly.
Reviewed By Glen H (SUWANEE, GA) Reviewed for a 2011 Ford F-150 —4/14/2016 4:01 PM
I added this to my 2011 F150 with the Firestone airbags. GREAT product and works perfect. I had 2 installation issues to overcome. First was the location to place it. I mounted the compressor to the under side of the bed, directly behind the spare tire. It's well out of the weather and well protected. Second was power supply to the controller. Key point: use the exact gauge wire as any other accessories you have connect (aka: amplifier, etc.).