Good Product that is well built
The product itself is very good quality and raised the front nicely. The downfall is that we have a 2014 F150, and the strut brackets have changed, and the directions did not have the update. We had to pretty much tear everything off including pulling the front axle out of the spindle to get the strut out. It wasnt terrible, it just took a little more time to figure out what all had to come off. The second side only took about an hour and a half from start to finish.
This was a very easy and good quality kit to install. There was no need to remove the strut or lower control arm. I removed the swaybar bolt and that allowed enough room to slip the spacer in. There was some tension on the control arm so a ratchet strap was used to pull it together. This took about 45 minutes per wheel to install.