Leveling Kits Reviews

I purchased the AirLift 1000 set for a 2005 Jeep Liberty Limited.Product literature promised a one hour +- install -- it took me over 4 hours.Not that I am mechanically challenged, I consider my skills far beyond "pro-sumer" level.The instructions were well written, product is high quality and works as advertised.On my installation, a 3/4 inch hole was required on the bottom of the spring plate. That is where the time added up.Drilling the hole requires a 3/4 bi-metal hole saw and a right angle drill adapter. Did I mention the time? Four trips to Home Depot and nearly 20 minutes of drill time were required to complete the hole.Everything else, from squeezing the bags into the coils and running the air line was easy.Art

Installation was not too difficult, had to work to get the ball bearing press around the exhaust pipe, but not bad. Truck sits level. The ride is a little firmer, but part of that i expect are the larger tires I put on and that I had to extend the adjustment bolts nearly all the way in (for maximum lift). Several people have complimented that the truck looks much nicer sitting level with the slightly larger tires - I fit 285/65 Open Countrys on it. I did not have to cut the inner apron and there is no rubbing.

Just installed the Truxx leveling kit on my 2011 Tundra Crewmax. Took a total of 3-4 hours. Instructions were minimal but had all the needed information to get it done. Quality of the kit was great. Everything fit the first time with no problems. I got the 3" front kit only. The actual lift looks more like 2.5" but now all the fender spacing are equal and it no longer feels like I'm driving down hill on level roads.

Excellent Product!!! Took it in to Sears for an alignment and techs swore it was going to need aditional spacers. They said that all trucks brought into them need an extension part that would cost an extra 100+ dollars. After placing it on lift, techs were surprised that very minute adjustments were needed. I would highly recommend product to anyone looking for a leveling kit. F-150 is currently sitting level:)

I just got back from a 2,000 mile trip with them on. They work great and they are made of quality components. The directions on how to mount the brackets and the stamping left to right on the brackets seem to be incorrect. If you mount them the way they tell you to they will not center on the axle tube. Be careful and think it through and you should be fine.