Do the job but could be better for the price
This definitely do the job right, that is restore swaybar end links angle on lifted vehicle, and allow more suspension droop before swaybar bind. But using two bushings instead of one bushing + one ball joint like OEM, I kind of concern the longevity of the bushing because I have extended droop. The washers on the frame ends are a little too big, which will contact the frame bracket during flexing. The inner sleeve for the swaybar end is rolled so it has a profound groove with edge.
So Far So Good
Not that hard to install. Will need TIN coated drill bits because the frame is TOUGH. Fits good and keeps S10 Xtreme pickup level when pulling trailer. Truck rides good with 10 lbs of air pressure when empty, and never had to have over 50 lbs pressure when trailer was loaded down. A good buy, and will be better with the optional compressor kit