Access Roll-Up Tonneau Cover

FORD F250

Posted on 07/01/2008 by Marshall S. - 2006 Ford F-250 (Gillette,WY)

0 of 0 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"It is very easy to operate and looks good."

Was this review helpful? Yes No

Satisfied--as it should be

Posted on 06/11/2008 by Douglas S. (Winchester ,MA)

0 of 1 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"The tonneau cover is exactly what I thought it would be. It's great, and I expect it will serve well for a long time."

Was this review helpful? Yes No

Access Roll-Up Tonneau Cover for 2007 Tacoma

Posted on 06/05/2008 by Ralph H. - 2007 Toyota Tacoma (Flower Mound,TX)

1 of 1 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"For an install on a 2007 Toyota Tacoma, this cover was excellent. The add shows clamps to mount it to the bed rails, but for the Tacoma, you remove the tie down rails on both sides of the bed, install the two aluminum cover side rails, along with the original tie down rails, and you’re done. All spacers and bolts are provided, and they all fit. Everything bolts down, no clamps to worry about. The fit was perfect, and where bolts didn’t line up exactly, the instructions told you they wouldn’t because it was designed that way for a snug fit. The install took about 45 minutes (and I work slow) and went without any problems. Installed, the cover looks like a hard top. I called a local truck accessory shop in town, and the wanted $150 more than I paid thru AutoAnything. I highly recommend this top if you’re in the market for a soft top at a great price."

Was this review helpful? Yes No

Access cover

Posted on 06/03/2008 by Jay W. (Cut Bank,MT)

0 of 0 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"Quality is top notch and looks great. Like the lifetime warranty."

Was this review helpful? Yes No

excellent product

Posted on 06/02/2008 by Paul P. - 1998 Chevy Truck 1500 (Redwood Falls,MN)

1 of 1 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"The cover is a well designed product. It is very easy to install as well as roll up and unroll. The cover looks amazing. I have noticed an increase in fuel efficiency and reduced drag on the truck from wind. The dual locking design is much improved from their previous models."

Was this review helpful? Yes No

Tom Grady

Posted on 05/06/2008 by Thomas G. - 2008 Chevy Silverado (Pittsfield,MA)

2 of 2 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"This is the third Access cover that I have purchased. I personally think it is one of the best tonneau covers on the market and I like the fact that it is a do it yourself installation. The only thing that would help is some clearer pictures with the instructions."

Was this review helpful? Yes No

Sharp-looking and Useful

Posted on 05/05/2008 by Thomas B. - 2007 Chevy Silverado (Wickenburg,AZ)

3 of 3 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"I have owned many pickups over the years, and found the Access roll-up cover when I bought a truck 4 years ago. It solved all the problems of appearance and use I had encountered with other snap on types. I installed it myself with ease, and no special tools. Recently I purchased a new truck and this was the first accessory to go on the truck. While there is no apparent increase in mileage as claimed, it looks great, dresses up the truck, and hides cargo. With the locking tail gate, cargo is also somewhat secure, but more important, out of sight. With the previous truck, when the cover began to weather a bit, I cleaned it up very nicely with a vinyl dressing product, and it began again to look as new again. If you encounter snow, the ribs that are included in the cover prevent sagging and keep everything looking good. I like the look of the fiberglass covers, too, but they of course limit what you can carry in the bed. With the roll-up cover it's easy and quick to open the bed, and the cover includes handy straps to secure it to the front of the bed when rolled up. Highly recommended for good looks and practicality."

Was this review helpful? Yes No

Nice cover

Posted on 04/06/2008 by Don C. (Shoreview,MN)

2 of 2 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"This is my 3rd access cover on my 3rd truck in 12 years and they just keep making them better. It was easy to install and easy to use. It looks great on my new truck."

Was this review helpful? Yes No

2008 Nissan Titan longbed with utili-trak

Posted on 03/25/2008 by Michael L. - 2008 Nissan Titan (Beverly,MA)

0 of 0 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"The Good: Pleased with the cover on the truck; works great. I have an '08 Titan Crewcab longbed and there are limited choices available for it due to it's 7 ft 3 in bed length. Agricover's Access Roll up looked to be the one. The Bad: I was concerned about mounting a tonneau in a bed with the utili-trak. I knew I didn't want to do any drilling. I looked at Agricover's website and it looked like they took into account the utili-trak. I talked to Joyce from Agricover on the phone and she emailed me a .pdf file that showed how the back half of the clamp could be reversed, turned sideways, and actually slid into the Nissan track sections. Great. I ordered the product, got it quickly, and at a good price, and lo and behold, the clamp did not fit into the utilitrak. It was shaped differently and simply too deep to fit in the track. There was an "additional" bag in the box with special instructions for Nissan Titan's with utilitrak. It called for me to ditch the clamps altogether and drill holes and put in a bunch of screws. I didn't want to drill holes, so I removed the utili-traks from the sides (I left the front track on) and simply used the supplied clamps. This is the second access rollup tonneau I've had. The first was on a Nissan Frontier, so I knew I'd like the convenience of it. I let a local shop do the installation on the Frontier and they used clamps, not screws into drilled holes, but I don't recall how it differed from my Titan installation. The other reason I didn't hesitate to remove the utilitrak sections is that the Nissan moveable tie downs that fit in the utili-trak, I think, would have been very close to the inside edge of the tonneau side rails anyways, which concerned me; I didn't want to attach a strap to a utilitrak tie down point and then put tension on it only to find out it was pushing against the tonneau rail. Instead I am relying solely on the tie down points in the bed floor of the Titan. I think those will work for my needs. Just wish I would've gotten the right info from Agricove"

Was this review helpful? Yes No

very smart design

Posted on 02/04/2008 by Charles E. - 2007 Honda Ridgeline (Woodbury Heights,NJ)

3 of 3 people found the following review helpful.

"aside from removing all the plastic pannels on the ridgeline to mount steel brackets, the overall istallation and fit were very straight forward, and the cover fits perfect, no water leaks and no wind turbulence"

Was this review helpful? Yes No