BAK RollBak Tonneau Cover G2

rollbak for new 09 dodge ram crew cab

Posted on 10/25/2009 by Timothy John K. - 2009 Dodge Ram (Saline,MI)

1 of 1 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"I am impressed with the quality and the looks. The instructions are on the verge of terrible but I was prepared for it because I had read several reviews on this product. I don't understand when you have such a good product why you would not take the extra time to give clear concise instruction because the actual installation would be a cake walk. Simple things like the aluminum angle brackets that you have to screw to your rail, are right and left handed or where and how you should mount the additional stops for the cover. How about the fact that there are 3 different websites and 3 different warranty statements. I am going by the 3 year warranty. Unit seems to be dry."

Was this review helpful? Yes No

Very Pleased

Posted on 10/19/2009 by John G. - 2010 Toyota Tundra (Greeley,CO)

2 of 2 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"Really like the BAK RollBak cover. Like several reviews, I think the directions could have been better. I spent longer than needed making sure the rails would position correctly before drilling the front brackets. The cover is not completely watertight as there was some water in the bed after driving through a car wash. Overall, I am very pleased with the cover."

Was this review helpful? Yes No

Very Good bed Cover

Posted on 09/13/2009 by Frank K. - 2009 Chevy Silverado (Allentown,PA)

0 of 0 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"I like the design and fits the bed well. I can secure my material & supplies. I had a lot of positive comments. It is a nice product. Frank Allentown, Pa."

Was this review helpful? Yes No

BAK Rollbak Review

Posted on 09/07/2009 by Wesley C. - 2009 Chevy Silverado (Lees Summit,MO)

0 of 0 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"Easy install. Instructions could be better. Some things you just have to figure out but it's not too hard. If you thought you were up to this task in the first place you'll get it done. Seems very sturdy."

Was this review helpful? Yes No

RollBak

Posted on 09/04/2009 by Thomas K. - 2010 Toyota Tundra (Chelmsford,MA)

1 of 1 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"I found the G2 easy to install.Can be installed by one person. The Quality was good . Could use a better rail system to close cover ,Women can find it difficult to close"

Was this review helpful? Yes No

tonneau cover review

Posted on 07/24/2009 by Bevel M H. - 2009 Chevy Silverado (Maple Valley,WA)

3 of 4 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"I shopped a lot of different types of covers. A friend had bought a bak rollbak and really likes it. This gave me an excellent opportunity to check it out. I installed it in about one and one half hours. Very satisfied. Bevel "

Was this review helpful? Yes No

Wasn't blown away as I thought I would be.

Posted on 07/13/2009 by Dennis M. - 2007 Toyota Tundra (Cortlandt Manor,NY)

2 of 2 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"Overall, I like the cover, however, the installation was not as fast and easy as BAK claim it is, nor were the directions 100% correct. Not sure what others think, but I'm pretty mechanically inclined and it took almost 4 hours to get it right and it's still not 100%. It's definitely not water tight, as water travels the rails and leaks into the bed at a pretty quick rate. Gas mileage is better and truck seems to handle slightly better (more rigid)."

Was this review helpful? Yes No

tom brown

Posted on 06/28/2009 by Thomas S B. - 2008 Ford F-250 (Waxhaw,NC)

0 of 1 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"I am extremely happy with my top and the installation was not a problem although the instructions were a little confusing a couple of times"

Was this review helpful? Yes No

love it

Posted on 05/21/2009 by Jessy F. - 2008 Ford F-250 (Yelm,WA)

3 of 4 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"damn glad i got it. fits like a glove and looks great. and yes you can walk around on it.."

Was this review helpful? Yes No

cool product

Posted on 10/29/2008 by Carla N. - 2008 GMC C/K 1500 (Angleton,TX)

7 of 8 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"I am very happy with the product, we had fast delivery, insructions need to be more detailed, and more pictures will be helpfull."

Was this review helpful? Yes No

F150 Roll Bak

Posted on 10/16/2008 by Daniel W. - 2007 Ford F-150 (Grants Pass,OR)

10 of 11 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"Looks and operates good but it was a pain to get the clamp aligned to stay flush with the bed. I had to make my own modifications and it took way to long to install."

Was this review helpful? Yes No

"A Little Contradictory and"....

Posted on 10/16/2008 by John A N. - 2006 Ford F-350 (Danbury,CT)

8 of 9 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"I watched the online video many times before I began the process of assembling the cover. The instruction booklet was not like the video. One would say one thing, and other (ie about the canister winding, and pre-loading the spring) said another thing. The lubriciant was not in the box, and I now have to try to purchase one myself. Other than that, the left rail had to be shimmed out because the cover was not set into the canister evenly, consequently, it was not being caught evenly in the two side rails."

Was this review helpful? Yes No

overall evaluation

Posted on 09/12/2008 by Joey C. (Hollywood,FL)

9 of 11 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"Love the look Handles well when locking & retracting More water gets in than i would have thought/will survive Install was quick & easy to get right first time !"

Was this review helpful? Yes No

Love the cover, but...

Posted on 09/01/2008 by Michelle Annette L. - 2008 Ford Ranger (Tucson,AZ)

11 of 12 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"The cover,now that it is on, is wonderful. The installation was a bit more than we were told. We had some difficulties just getting to the install part, all BAK related. AutoAnything has been wonderful. We had a gift certificate for another company, so we ordered the BAK bed rail and tailgate protectors from them. BAK shipped the tailgate protector and forgot the bedrails and we got billed for it all. Took about three weeks to finally get that straightened out and recieve the bedrail protectors. We finally got to start putting on the cover and discovered that BAK had forgotten the rail clamps and spacers. Guenivierre at Auto Anything customer service got them for us from BAK in about three days. Yay! We can finally start! The instructions leave out some details about different installations. A few hints could have saved at least an hour in Tucson summer temps. The video and the printed instructions were incomplete and did not match in some instances. But...now that it is actually installed we are absolutely thrilled with the outcome and the cover. It is black and looks great on our silver Ranger. It works like it is supposed to and by going through Auto Anything it is a great value. Two ladies took about 5 1/2 hours to put it on."

Was this review helpful? Yes No

Nice Cover - Poor installation instructions.

Posted on 08/21/2008 by Daniel A. (Taylor Ridge,IL)

6 of 6 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"I am happy with the fit, function, and appearance of the BAK ROLLBAK cover. The installation instructions, however are generally vague and sometimes mis-leading. For example, the instruction pamphlet, the instruction video at bakliner.com, and the label on my unit all gave contradicting specifics as to the number of revolutions for spring pre-load at the cannister. Even so, installation can be accomplished with reasonable mechanical aptitude, and the results are well worth the effort."

Was this review helpful? Yes No

can improve on instruction

Posted on 05/19/2008 by Ray N. - 2008 Toyota Tacoma (Torrance,CA)

13 of 15 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"Like other report, instruction were poor it would have been nice to see a list of parts and discription in the box left rail, rt. rali, screws washers etc.. I ended up with a piece of felt, had no idea where it went. called the factory and was told that item was not needed. I had a problem with the square plate/bolt and nut assembly as it got loose having to remove both side rails 2X to tighen the nut. I added a drop of locktite to solve that problem, the powder coating on the cover could have been a harder material as I got a few scratches. The installation was fairly easy. Looks good as adverstised need to wait for the rain to check out leakage."

Was this review helpful? Yes No

Poor Instructions

Posted on 03/15/2008 by Kurt L. - 2000 Ford F-150 (Saint Peters,MO)

13 of 14 people found the following review helpful.

Appearance

Ease of Installation

Price/Value

Quality

"All in all the qaulity of the cover is good. The instructions are a little lacking. With some common sense and some mechanical ability one can figure it out. I installed it in about two hours. Not enough shims were sent, I had to make my own. It is important to shim properly to get it to run smooth. I had to add weather stripping to front bed rail in order to be weather tight. Over all I am happy with the cover, it does the job by keeping my tools and gear secure."

Was this review helpful? Yes No

good cover

Posted on 02/19/2008 by Al B. - 2006 Ford F150 (St. Bernard,LA)

5 of 8 people found the following review helpful.

"cover is great but it does leak a little. but the latch system and the opperation is very good."

Was this review helpful? Yes No

Installation

Posted on 02/15/2008 by William L. - 2008 Ford F-150 (Minden,LA)

9 of 9 people found the following review helpful.

"Don't believe the propaganda that it will take just a short time to install this puppy. I did it alone but in five hours and not cause I am just slow. The directions are ditzy and totally unclear. After installing the unit then reinstalling it several times, I got it on right..well mostly! Had to finally sucumb to calling their hotline and getting information on parts that were not depicted in the instructions nor was it clear what the hell they were for. All in all it is a nice nearly weatherproof cover, better and more sturdy than the Pace Edwards I had on my 2004 F150, so far that is. It seems to be more solidly constucted and looks very good on my new F150 and was only about $200 more than the Pace Edwards. All things being equal, it is a pretty good cover and I think I will be pleased with it down the road."

Was this review helpful? Yes No

Looks Nice...

Posted on 02/02/2008 by Steve L. - 2006 Ford F250 (Troy,IL)

4 of 5 people found the following review helpful.

"The look of the roll cover is really nice. Installation was more difficult than anticipated since the width of the bed is narrower in the back. Had to shim the front end of the rails or the cover would pop out from under the edges. Still a little stiff at the very end of the unroll motion - might need additional adjustment. Latch release doesn't line-up correctly but I can live with it."

Was this review helpful? Yes No

Good cover for the money

Posted on 02/01/2008 by Shane B. - 2005 Ford F350 (Canton,GA)

5 of 5 people found the following review helpful.

"The cover is worth the price. It actually works as described. However, I can't believe how much trouble it was to install. Additional pieces were included in the package with no identification or reference in the instructions. It took quite a bit of adjustments to get the fit correct. My advice, buy the cover and just budget for an extra hour or two for installation."

Was this review helpful? Yes No

BAK Rollbak Tonneau Cover

Posted on 12/18/2007 by Roy B. - 2007 Chevy Silverado (Graham,TX)

4 of 4 people found the following review helpful.

"Went on faster than other reviews that I had read. Keeps water out much better than expected. Roy L."

Was this review helpful? Yes No

Review,for BakRollbak tonneau cover.

Posted on 12/12/2007 by Manuel C. - 2007 Toyota Tacoma (Naples,FL)

4 of 4 people found the following review helpful.

"I am very please,with this cover,it is very strong and elegant,it is well built,and works very well, the only problem,are the instructions,the manufacturer,certenly,can do a better job than that.thank you. Manuel."

Was this review helpful? Yes No

Very Good

Posted on 12/02/2007 by Tom W. - 2008 GMC C/K 1500 (Thunder Bay,ON)

1 of 1 people found the following review helpful.

"Love the cover. Works as advertised and looks great."

Was this review helpful? Yes No

Nice cover

Posted on 10/26/2007 by Terry J. - 2007 Toyota Tundra (Little Rock,AR)

8 of 8 people found the following review helpful.

"Very versitile,tough cover. Installation would have gone smoother with better instructions. Putting everything together and on the truck is fairly straightforward, its all the adjusting to make it right that takes time and causes frustration. I did have to drill into my bed rails(the inside) with tap screws to help secure the front brackets.It needs more clamps to secure the rails because there is some flexing when weight is applied to the top.The top itself is very rigid and well made. I stood on it. Operation is easy and works well once you master the "pull back and twist up" on the right side where the top unlatches from the closed position.It is not water proof, but none are, not even the over the rail fiberglass ones.(I have one of those on another truck)But very little gets in, and mostly only at high pressure car washes.This top protects my valuable tools I use every day,from weather, and thieves, and is SO much more practical than other tops, and of course, looks great.I went to a local dealer to check out the similar tops they had, and quality wise, they are pretty darn equal.But the price for this one at autoanything was nearly half of what the dealer wanted.I am very pleased with the purchase of the rollbak cover."

Was this review helpful? Yes No