We’re sorry. The information you have requested is temporarily unavailable.
Draw-Tite Trailer Hitch Part #41938 Customer Reviews
3 Customer Reviews
Reviewed by Brett M (Cumberland, WI) Reviewed for a 2000 Chevy C/K 3500 — Jun 22, 2016 2:08 AM
I have a 2000 Silverado 3500 dually. Before ordering I called support to verify that it would fit. They said it was the right one and was guaranteed to fit. I did not want to deal with sending the wrong one back so I also asked if the measurement between mounting holes was 34 1/4". They said it was. I got the hitch within a few days but it was way too narrow. Holes were 31", not 34 1/4" wide. Spent 3 hours cutting it apart and welding it back together so it would fit my truck.
Reviewed by Terry P (DRESDEN, OH) Reviewed for a 1987 Chevy C/K Pickup — May 15, 2016 10:21 PM
Great reciver well built had to open up my factory frame holes and drill two new holes but I had expected that but it lined up very well had it installed in less than an hour and all the mounting hard wear worked great
Reviewed by Kerry R (CLEARFIELD, UT) Reviewed for a 1986 Chevy C/K Pickup — Dec 01, 2015 8:19 PM
This does require drilling out some holes to 9/16". It is very heavy duty on it's rating and is built accordingly. It uses the holes in the frame infront of the rear spring hangers and 6 others. It should be able to handle the weight. The side plates are about 3/8" thick, this hitch is heavy to lift and install so plan on two people and drilling.
Ships Between 1/18 - 1/22
- What Do You Drive?
- Part Size:2" Receiver
- Style:Square Tubing - 12,000 lbs/15,000 lbs
- Part #:41938
- Maximum trailer weight = 12,000 lbs/15,000 lbs with weight distribution setup
- Maximum tongue weight = 1,200 lbs/1,500 lbs with weight distribution setup
- Ball mount sold separately
- Installation instructions (PDF)