Reviewed By NICHOLAS S (GREAT NECK, NY) Reviewed for a 2003 Dodge Dakota —9/11/2016 4:43 AM
The Curt receiver was delivered in a few days, and easy to install.
Reviewed By Andrew M (Columbus, IN) Reviewed for a 2003 Dodge Dakota —10/19/2015 4:43 AM
The receiver hitch is built well, but installation took about 2+ hours instead of 40 minutes due to hole misalignment. While loose-fitting, I found that the holes for the cross-member were about 1/2" too far forward (when mounted on truck), and bolts could not be fitted through. I had to pull the receiver off and drill/file the holes out 1/2", then remount. Only other trouble is the locking plates they provide for bolts can only be installed in a single specific orientation. Took a couple tries.
Reviewed By BILL R (LITTLETON, CO) Reviewed for a 1992 Dodge Dakota —4/28/2016 1:22 PM
I was very worried about the installation when i bought the DRAW-Tite Hitch, but once I started the process it was a simple procedure, having to drill 4 holes, but with the one bolt in the frame that lines up and holds the whole thing in place made it easy to complete.