AutoAnything, Inc.
Select your vehicle:
Select your vehicle:
AutoAnything, Inc.
1-800-874-8888
Your Cart Is Empty
Cart
X
Select your vehicle:
Select your vehicle:

2010 Dodge Challenger
Exhaust, Mufflers & Tips

2010 Dodge Challenger Exhaust, Mufflers & Tips

Not sure which 2010 Dodge Challenger Exhaust, Mufflers & Tips are right for you? We have over 11164 customer reviews, with an average rating of 4.5, to help you find exactly what you're looking for. Here's what some of our customers have said:

"Very quiet at cruising speeds but good sports car sound during accelaration. Could be a little louder but since theirs no drone I'm fine with it. I would buy it again if I had to. Quality product." —Sevak K from North Hollywood, CA bought a Corsa Performance Exhaust for a 2010 Dodge Challenger, R/T, automatic, 5.7L Hemi.

"I have airiad cai, flow master super 40custom dual exhaust and Diablo I1000 tuner. Not too much of a big difference except for response. Sounds slightly went up in the front end. Installation was easy, but I had to bend the pipes down because the shorties are pretty short. Overall good buy for the price and quick delivery." —Dexter D from Waco, TX bought a JBA Cat4ward Headers for a 2010 Dodge Challenger, 3.5L V6.

"These have really added an unmatched look to my challenger, had to get them welded to my FM American thunder catback exhaust." —Jeffrey H from El Paso, TX bought a Flowmaster Dual Round Angle-Cut Exhaust Tip for a 2010 Dodge Challenger.

"I have airiad cai, flow master super 40custom dual exhaust and Diablo I1000 tuner. Not too much of a big difference except for response. Sounds slightly went up in the front end. Installation was easy, but I had to bend the pipes down because the shorties are pretty short. Overall good buy for the price and quick delivery." —Dexter D from Waco, TX bought a JBA Cat4ward Headers for a 2010 Dodge Challenger, 3.5L V6.

"Put the cat back on myself but paid for the shorties to be installed. really opened the car up" —Mickey C from Cedar Park, TX bought a JBA Cat4ward Headers for a 2010 Dodge Challenger, 5.7L Hemi.

"These have really added an unmatched look to my challenger, had to get them welded to my FM American thunder catback exhaust." —Jeffrey H from El Paso, TX bought a Flowmaster Dual Round Angle-Cut Exhaust Tip for a 2010 Dodge Challenger.

"This will be a bit of The good,the bad,the Ugly. Added the JBA shorts to complement the Flowmasters installed a few weeks back.Sounds Great,Nice Throttle response now and sounds incredible. The Felt Gaskets they Ship with these are Outright Horrible. Both center cylinder heads on both sides blew the felt right out the Side within a mile. Finally Grabbed the Stock 5.7 Mopar gaskets(removed shield) and got it taken care of that way. Do yourself a BIG favor and grab Header gaskets separately and toss the felt ones sent with this kit. Despite the Headache was a nice addition!" —Chris C from Runnemede, NJ bought a JBA Cat4ward Headers for a 2010 Dodge Challenger, 5.7L Hemi.

"Great fit, Awesome sound, immediate power. Install was somewhat of a pain but- mainly fitting aftermarket parts. But overall satisfied." —Jorge U from Albany, GA bought a JBA Cat4ward Headers for a 2010 Dodge Challenger, 5.7L Hemi.

"Has definitely opened the car up, the throttle response is like a hairpin trigger and paired up with the FM American thunder catback the exhaust note is like heaven!" —Jeffrey H from El Paso, TX bought a BBK Performance Exhaust Headers for a 2010 Dodge Challenger, 5.7L Hemi.

"Tips should give better dimentions length wise Longer than what was shown Did cause a small problem" —Gary E from Greenback, TN bought a Gibson Sport Exhaust Tip for a 2010 Dodge Challenger.

"First impression its great quality and great built. I decided to buy it because of what ive read on the forums. Price was a factor and for the price I couldnt be any happier :)" —Joshua V from Flushing, NY bought a JBA Cat4ward Headers for a 2010 Dodge Challenger, SRT-8, 6.1L Hemi.

In addition to Dodge Challenger Exhaust, Mufflers & Tips, you may also enjoy one of these popular products: Kurgo Portsmouth Bucket Seat Cover, Rugged Ridge Sound Bar, Surco OSI Folding 3 Bike Rack.
Top Brands
Current Offers
Category
All Brands
Application
Price Range
1-12 of 167 products
Page 1 of 14

Free, no-hassle exchanges

Risk-free. Guaranteed perfect fit.

Guaranteed Lowest Price

Price protection for up to 1 year.

In-House Experts

Chat or Call for Special Offers.

Trusted Brands

Customer Reviews

MBRP Exhaust Systems

Sounds more mello after a week of daily use

The installation: Def could have been easy if they had included a left and a right muffler, as each muffler is specificly left or right. I received two driver side mufflers, resulting in having to cut off the mounting tabs and reweld the tabs back on. That makes this a non-bolt on system. The mufflers can not be flipped as the inlet is 3" and the exit where the tip mounts is 2.5". Sound:These do drone, but not as much as flowmasters. Also seem to have gotten quieter after a week of daily use. View more reviews...
Posted By PHILLIPS L B (Lynnfield, MA) / February 15, 2018
2010 Dodge Challenger
Yes
No
JBA Cat4ward Headers

Challenger

Headers look great,good welds, smooth bends. Feels solid. Instillation was not easy,but with a lift and a fiend to help it wasn't terrible. Combined with CAI, cat back exhaust they really woke up my 2010 Challenger 5.7. The engine spins up much quicker than with stock manifolds. Sound is about the same. Not noticeable louder inside. No dyno numbers but seat of the pants feels like 25-35 more horsepower. View more reviews...
Posted By Tom C (KELSEYVILLE, CA) / April 7, 2017
2010 Dodge Challenger
Yes
No
BBK Performance Exhaust Headers

Excellent product

This is a great product. Perfect fit, great sound and a performance boost. And best of all, designed and built in the USA by Americans for Americans! View more reviews...
Posted By Wendell K (Indianapolis, IN) / August 4, 2016
2010 Dodge Challenger
Yes
No