Reviewed By Walter C (RICHMOND, VA) Reviewed for a 2008 Mazda Miata/MX-5 —1/13/2018 5:24 AM
Friend who had done this before did most of the work. Directions sheet needs revised. Bought a heat gun because of your "recommendation" but a hair dryer would have been fine so wasted $20. Working from center out is impossible. Better to line up upper edge and work down, otherwise alignment is impossible and requires several remove and replace cycles with chance of finger prints. Too early to tell how product holds up. Installed apperace is very good and fit to my Miata is very good.