- We work hard to deliver you the lowest prices up-front, everyday.
- We'll beat any price - online or offline.
- We put 1-year price protection in your pocket.
This switch will only work on bikes that have front disc brakes. In addition, the front master cylinder must have a banjo bolt that is unobstructed by the handlebars. This switch will only work with banjo bolts that have a 1.25mm thread pitch.
This is a small DC regulator/Rectifier that is designed to regulate DC voltage to your headlight.
This plug and play 55 inch universal wiring harness is compatible with the OnX, OnX6, XL (Pro and Sport) and XL-R (Pro and Sport) LED lights. This wiring harness can be used with Part 44-7550.
This harness can be installed on almost any vehicle and will power our Squadron, SII, Fuego, PreRunner and LaPaz. This harness now includes a splitter harness which allows you to run three (3) lights off of one harness and an ON/OFF switch kit! It also includes splice connectors in the event you wanted to trigger the lights via your high beam.
Includes relay switch.
Three (3) two-pin Weather Pak connections to run multiple lights
Switch Kit (On/Off)
Splice Connectors for High Beam
Draws power directly from battery terminals.
Built to accommodate most truck, buggies, and cars.
This plug and play 55 inchuniversal wiring harness is compatible with the Squadron (Pro and Sport) and S2 Pro LED lights. This wiring harness can be used with Part 44-7550 or 64-0088 see related items section for product.
This harness was designed for someone looking for a harness that is long enough to reach to the rear of your car or truck and power an RTL. The harness comes equipped with high quality sheathing and a relay to power all the functions; running light, brake, and cargo/reverse light. If you have purchased an RTL-S please purchase harness 64-0130. 64-0130 will include jumpers to tap into your turn signals.
This harness is designed to plug in-line with all of our vehicle specific kits that utilize factory fog light wiring. The harness is rated up to 150 watts and allows the lights to be triggered off of the plug and play adapters in your kit. If your vehicle is experiencing flickering issues due to CAN-BUS system interference this is the harness for you!
This harness is all you will need to in order to get full versatility and functionality from your LP9 lights!
The Baja Designs LP9 Pro Harness Includes:
Complete harness for Baja Designs Onx6 and OnX LED Light Bars. This harness takes all the guess work out of installation and is incredibly high quality suited for race use! Put your dust and strobe modes to use! This harness allows you to use the high beam or toggle switch to turn on the light bars.
Note: OnX6 Hi-Power utilizes harness 640119
This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our Onx6 and Squadron XL. This harness Does Not have an option for a momentary switch. It includes an On/Off toggle button to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED lights listed above.
This harness takes all the guess work out of installation and is incredibly high quality suited for race use! Put your dimmer mode to use! This harness allows you to use the high beam or toggle switch to turn on the light bars.
Please Note this harness is specifically designed for IR Lights and S8's
This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our Fuego, PreRunner, LaPaz, Squadron and SII. It includes an On/Off toggle button to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED/HID lights listed above.
This harness was designed for someone looking for a harness that is long enough to reach the mounting location of your RTL on your two or four seat Can-Am or RZR. The harness comes equipped with high quality sheathing and a relay to power all the functions; running light, brake, and cargo/reverse light. If you have purchased an RTL-S please purchase harness 64-0111 which will include a rectangular rocker switch to plug into your factory dash.
The harness comes complete with a red backlit rocker switch which flashes to indicate the direction you are turning. This switch is designed to install directly into your factory dash location. There is also another switch which gives you a dust light option illuminating amber lights simultaneously. This harness must be used in combination with the 64-0116.
This wiring harness has been designed for the OnX and Onx6. The mode switch kit will allow you to control the power to the light via a toggle switch, and control the dust and strobe modes via the included momentary switch. For more information see product (64-0116).
Take the guess work out of installing lights with one of our harnesses! This UTV harness was designed to be an On/Off style harness for our three pin lights such as the Onx6+, S8, and XL series.
If you're looking for a harness that was designed with lengths for a UTV and a rocker style switch this is the harness for you!
This harness can only provide enough power for up to a 30 Inch Baja Designs Light Bar.
This wiring harness has been designed for a universal application. The requirements for this harness are that it needs a battery to run off of and the bike Must have enough DC power in order to run the light you are trying to purchase.
This harness comes equipped with an on/off handlebar switch, and optional taillight lead.
This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our LP9 Sport Series. This harness Does Not have an option for a momentary switch. It includes an On/Off toggle button to provide power to the lights. This harness comes ready to power up to two (2) LP9 Sports.
Do you love the look of backlit lighting and want to take full advantage of this functionality included with our S8 lights? This harness was designed specifically for those without a backlight wiring solution looking to add it to their current harness.
This harness features plenty of length to reach the fuse panel, or a splice to keyed power. Included are detailed instructions, four common fuse taps, an alternate splice connector, and zip ties.
Save yourself some valuable time with this backlighting solution and get back out there!
This harness allows you to utilize the built-in dimming feature found on XL Pro and XL80 LED Motorcycle Lights. This includes one bullet connector that goes directly to your XL Motorcycle Light and a ring terminal that goes to a frame/chassis ground.
This switch will easily dim the light from full brightness to 20 percent output. Please keep in mind our lights are not DOT approved or street legal. It is up to rider discretion if being used on the street.
The Baja Designs XL Pro/XL80 Mode Harness contains:
Complete harness for Baja Designs XL (Pro and Sport) LED Light. This harness takes all the guess work out of installation and is incredibly high quality suited for race use! This harness allows you to use the high beam or toggle switch to turn on the LED light.
(1) XL (Pro and Sport) Wire Harness w/Mode-2 lights max 325 watts (64-0119)
(1) OnX6/XL (Pro and Sport) Wiring Harness Splitter - adds 1 light (61-3608)
25 years ago, Baja Designs was founded with a passion and thirst for off-road. Performance driven and race proven – Baja Designs engineers and manufactures American made products, using only the best components available, right here in San Diego, California. Since the beginning, we have engineered revolutionary ways to stay at the forefront of motorcycle and automotive lighting.
The first product developed was a Dual Sport kit that made pure off road motorcycles minimally street legal. Our intimate knowledge of motorcycle electrical capabilities eventually led us to engineer the first HID motorcycle race light. Founder and Lead engineer Alan Roach, an avid Baja 1000 motorcycle racer, was able to fine tune a motorcycle’s limited light optics to maximize rider comfort, speed, and safety. As a result, BD lights have won every professional and amateur motorcycle and ATV Baja 1000 class for over 15 years.
As our engineers and racers advanced to truck and buggy racing, the next evolution began. The engineers quickly adapted their race winning HID motorcycle lights to their new race vehicles. With amazing speed, BD HID lights were adopted by the vehicle race community and could be found on the majority of Baja 1000 winning vehicles. In the process, BD engineers became well known as "The Scientists of Lighting" and were sought out by professional race teams to develop and aim their vehicle lighting.
LED lights were the next natural evolution of lighting and BD was the first company to develop a forward projecting LED light bar which was introduced and raced in the 2005 Baja 1000. That original LED light bar has evolved into a line of the highest performing and race winning LED lights on the market.
Revolutionizing industry leading lights is not just a job at BD, but a lifelong passion for both the owners and employees. The BD product line is dedicated to being BRIGHTER, BOLDER, and BETTER, which is why we truly are "The Scientists of Lighting".