We’re sorry. The information you have requested is temporarily unavailable.
Draw-Tite Trailer Hitch Part #75038 Customer Reviews
2 Customer Reviews
Reviewed by TOMMY B (Mooresville, NC) Reviewed for a 1986 Dodge Ramcharger — Nov 06, 2016 2:38 PM
Holes did not align properly. Cross bar was about 1/2" short making holes not align. Had To enlarge and slot holes toward the outward side of the side frame Attachment brackets
Reviewed by Daryl K (Fayetteville, AR) Reviewed for a 1991 Ford Bronco — Mar 13, 2012 5:47 AM
I like the over all qualitay of the hitch. The instulation was a little more work than I anticiapted. When you install this hitch on a 1991 Bronco be prepared to take 2-3 hours, due to the fact that you have to drop the front of the gas tank to get to the nuts on the frame. I pulled the front bolts and then just loosened the back ones, and then with a jack dropped the tank until I could get in with a wrench. Also the hitch arms were not square with the frame, so I had to force them to line up with the frame and the holes on the frame. If the arms on the frame had been square with the frame it would have gone much faster.
Ships Between 6/19 - 6/21
- What Do You Drive?
- Part Size:2" Receiver
- Style:Square Tubing - 5,000 lbs/8,000 lbs
- Part #:75038
- Maximum trailer weight = 5,000 lbs/8,000 lbs with weight distribution setup
- 2 in. receiver
- Ball mount sold separately
- Installation instructions (PDF)